Availability of a 1/2 Inch Diameter Pin With a 3 Inch Length

Question

Question:

I am looking for a replacement pin that is 1/2 in diameter and 4.5 long with the straight part about 3. Do have have a pin this size?

asked by: Ray

0

Expert Reply:

We offer a hitch pin by Redline, with part # 12H which would be the closest match, as it is a 1/2 inch diameter pin with a straight pin length of 3-1/2 inches.

A similar option is the Curt # C45805, with a 1/2 inch diameter and a 3-5/8 inch overall pin length.

expert reply by: Sarah L

0

click to enlarge

Answer 1

Yes, there is a way to add a roof rack to your 2023 Honda Pilot even though you do not have the side rails, and the best option is from Yakima, consisting of the Crossbars #Y36UV, Fit Kit #Y06152 and Fit Kit #Y06163. This rack has a flush design…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hey Jason, whenever available I would recommend going with the channel attachment for roof rack accessories including the Thule Hullavator part #TH898 as its simpler stronger, and it's basically the future of most roof rack accessories as it…

view full answer...

Answer 6

Hey Sean, the install of the etrailer hitch part #e44AR does not require replacing the lower fascia with a different one. That seems to be the case for the OEM hitch which sits up higher but not this hitch which fits below the rear bumper. This can…

view full answer...

Answer 7

The best hitch for your 2023 Honda Passport is going to be the Curt Hitch item #C13421. This hitch is custom fit and bolts to your Honda with included hardware. I really like the Curt hitch because it tucks up underneath your rear bumper cover nicely…

view full answer...

Answer 8

Hey John, the install hardware of the etrailer hitch part #e44AR that you referenced does not require any thread locker because it's considered torque to yield which means the bolts stretch a bit which basically makes it act like a thread locker…

view full answer...

Answer 9

Hi Burt, Because of the placement of the sensors compared to the position that the hitch will mount there are no trailer hitches available that won't impact the functionality in some way. Typically if you wave you foot on either side of the…

view full answer...

Answer 10

The Honda sensor kit you're talking about is a relocation kit so the hands-free liftgate will function as normal with a hitch installed. You can install either the Curt #C13421 or Draw-Tite #76290 hitch on your 2022 Honda Passport and it…

view full answer...

Availability of a 1/2 Inch Diameter Pin With a 3 Inch Length

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching