Is the Pilot Integrated OEM Tailgate Lock LH-007 the Same as the Bully LH-007

Question

Question:

Is this the Pilot LH-007 the same as the Bully LH-007

asked by: Bart

0

Expert Reply:

The Pilot Integrated OEM Tailgate Lock # LH-007 is the same as the Bully LH-007 mentioned in your question. Pilot is the parent company of Bully. This will fit your 2008 Dodge Ram Pickup to provide a lock for your tailgate with a nice OEM look and includes 2 keys.

expert reply by: Chris R

0

Answer 1

I believe the part that you are looking for is the Replacement Adhesive Velcro Strip for Access Tonneau Covers #A20790 which measures 16' long x 1-1/4" wide. This also comes with alcohol wipes to ensure that you are installing it to a clean…

view full answer...

Answer 2

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 5

Hey, Daniel. Thanks for your question. We do have a weight distribution hitch that would work for your trailer and still use chains. That hitch is the Blue Ox SwayPro #BXW0350. The tongue weight rating needed for this system to work is between…

view full answer...

Answer 6

Hey Don, Curt does have a Class V hitch for your Ram but it sits super low so it's not going to be what you want. Draw-Tite offers Trailer Hitch Receiver #DT45509. It has a 2-1/2" receiver tube opening, 18,000lb gross towing weight/2,000lb…

view full answer...

Answer 7

Hey Mark, yes we do have a version of the Andersen part #AN88VR with a 2-5/16 inch ball instead with the part #AN53VR. What does your trailer weigh?

view full answer...

Answer 8

Hey Delbert, thanks for reaching out! Yes, the Andersen Weight Distribution Hitch w Sway Control #AN53VR can be used for a lighter trailer like what you have. You'll just need to adjust the system to accommodate your weight and you'll be good…

view full answer...

Answer 9

Yes, it does. The TorkLift Custom Fit Tie Down Kit Item #TL46VV does indeed include the Front item #TLD2101 and Rear item #TLD3109. These will fit your 2006 Dodge Ram 2500 so long as you do not have running boards that run past your cab. If you do…

view full answer...

Answer 10

Hey Wes, unfortunately it looks like the Hellwig Big Wig Rear Anti-Sway Bar #HE32RR is not intended to be used with Diesel engines so it's not going to work with your Dodge 2500. We do have a couple other options that don't say anything about…

view full answer...

Answer 11

Hi Doug! If you were just needing a weight distribution system for the sway control, I would have said the Andersen Weight Distribution Hitch w Sway Control - 6" Drop/Rise - 14K GTW, 1.4K TW #AN53VR could be a good option. However, I have tried…

view full answer...

Answer 12

Hello Steven, You will want to use a 3 1/2" bit as you need a 3 1/2" hole for the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs #BWGNRK1320. I attached an image where it goes over the size…

view full answer...

Is the Pilot Integrated OEM Tailgate Lock LH-007 the Same as the Bully LH-007

Featured Help Information

Miscellaneous Media

Continue Researching