Both Turn Signals Blink When the Turn Signal is Used
Updated 01/20/2020 | Published 02/16/2017 >
Question:
Both turn signal light blink when turn signal used
asked by: Craig
Expert Reply:
You most likely have either a short in your wiring or your two circuits are touching somewhere. What you will want to do first is to test the wiring harness on the back of your tow vehicle, you can do this using a Circuit Tester, part # PTW2993. I've linked a video that will show how to test a 4-Way trailer connector with a circuit tester.
If you test the vehicle side trailer connector and find the problem to be on your vehicle, then there are a few things that you can try. You can check the wiring on your vehicle to make sure that it isn't pinched, cut, or damaged, and you can also check to see if your vehicle uses a converter box, like the Hopkins part # 119190KIT does. If your wiring does use the converter box, then it is possible that the converter box could be malfunctioning and causing the signal to cross over. You can use the circuit tester to check the signal on each wire going into the converter box to ensure that the signals are reaching the box. If the signals are going into the box correctly, but not coming out correctly, then there is something wrong with the converter and the wiring harness will need to be replaced.
If you test all of the functions on your tow vehicle and everything is working fine then you will want to move on to the trailer by inspecting the wiring harness and the wiring on it to make sure it is not corroded or damaged anywhere.
If you follow these steps and cannot find the problem or solution, let me know what you come up with and we can do further troubleshooting.
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Both Turn Signals Flash at The Same Time
- Video: Installing the Roadmaster Smart Diode Kit for Variable Voltage Incandescent Tail Lights on a 2025 Ch
- Q&A: Trailer Turn Signals Both Blink at the Same Time When Right or Left Turn Signal is Turned On
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Article: Flat Towing Package for 2025 Chevy Trax
- Article: Can You Flat Tow a 2025 Chevy Trax?
- Shop: Blue Ox Bulb and Socket Tail Light Wiring Kit for Towed Vehicles - Incandescent
- Video: Comprehensive Review: Roadmaster Smart Diodes for Variable Voltage Incandescent Tail Lights
- Shop: Roadmaster Smart Diode Kit for Variable Voltage Incandescent Tail Lights - 7-to-6-Way Adapter Cord
- Shop: Roadmaster Smart Diodes for Variable Voltage Incandescent Tail Lights - Qty 2
- Q&A: Turn Signals on Trailer Not Working When Running Lights are On
- Q&A: Correct Way to Wire Trailer Breakaway Kit
- Video: Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit Review
- Video: Feature Breakdown: Blue Ox Tail Light Wiring Kit for Towed Vehicles
- Search Results: smart diode
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Curt Custom Tail Light Wiring Kit for Towed Vehicles
- Shop: Curt Universal Tail Light Wiring Kit for Towed Vehicles - 4-Way Flat Connectors
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector
- Search Results: wiring harness flat tow wiring harness
- Search Results: trailer wiring
- Search Results: smart diodes
- Shop: Trailer Hitch
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Q&A: Which is Better Roadmaster or Blue Ox Tow Bar





Razz
1/19/2020
I had no lights at all on back of truck put a new ground wire to frame now have brake lights and running lights and turn signals but when you turn on driver side turn signal both turn signals come on at same time but when you turn on passenger turn signal you have nothing what could be the problem