Running lights, a fridge, and an inverter, voltage can look fine until it drops fast. This monitor tracks state of charge, current, and remaining runtime in real time, with Bluetooth app access, so you can see usage and adjust before power runs out.
Basic voltage readings can look normal until the battery drops hard once the load comes on, which is exactly why deeper tracking matters in RV and off-grid systems. This monitor tracks battery voltage, current, power, ampere-hours consumed, state of charge, and remaining runtime estimation based on the current rate of discharge. With live data tied to actual discharge conditions instead of a single voltage snapshot, you can check the system while lights, a fridge, or an inverter are running and see where the battery really stands before power gets tight.
Walking back to a panel every time you want an update gets old fast, especially when you're trying to track changing loads through the day. Built-in Bluetooth gives you app-based monitoring for wireless communication, with smartphone access for configuring settings, monitoring live data, viewing history, and updating software. You can pull up current system numbers and past performance in one place, so it's easier to spot changing consumption patterns and catch battery behavior that doesn't look right.
A monitor that only displays numbers still leaves you watching the system manually when power starts getting low. This unit adds programmable visual and audible alarms plus a programmable relay for switching non-critical loads or running a generator, and it uses a bi-stable alarm relay design to prevent increased current draw during alarms. When settings are configured the way you want, the monitor can do more than report a problem and gives you a clear warning or relay action while the battery still has room left.
Multi-battery systems bring more to watch than a simple single-bank setup, and entry-level monitors can run out of room fast. This monitor includes midpoint voltage monitoring for series connected battery banks, an additional input for second battery voltage, temperature, or midpoint voltage measurement, a VE.Direct communication port for wired data connection, and shunt selection capability up to 10,000 Amps. That gives you a monitor that can stay useful as the system gets more involved, with more measurement points and connection options instead of forcing a basic one-bank view.
Battery monitoring doesn't do much good if the monitor itself keeps pulling more power than it should, especially on setups where every bit of stored energy counts. This unit uses a low power consumption design with very low current draw to minimize battery drain, especially important for lithium batteries. You can leave it in place for continuous monitoring and keep tabs on the system without adding unnecessary parasitic draw in the background.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer. Let's take a quick look together at this Victron BMV-712 Smart Battery Monitor in black. So instead of guessing how much battery power you have left, this monitor is gonna tell you exactly what's going on. This is going to track battery voltage, current flow, amp hours used, state of charge and percentage, and even how much runtime you have left based on your current usage. This does use a precision 500 amp shunt, which is going to measure everything that's going in and out of your battery.
And one of the big selling points is that this does have built in Bluetooth, so you're gonna be able to see all the information right on your phone or tablet using Victron's Victron Connect app, which is gonna be a free download in your app store. So you're not going to need a separate display if you don't want one. However, this does include a black round panel mount display if you prefer to see the data at a glance. This monitor is commonly used in RV, marine, off-grid, solar, overland and backup power systems. So in those situations it can be important to know your true battery state, And this is gonna be especially useful with lithium batteries where voltage alone isn't a reliable indicator of remaining capacity.
You see you're gonna get this matching black trim piece for this display as well. So you're gonna get everything that you see here on my table. You're gonna get the BMV-712 display in black, the 500 amp shunt, all the necessary cabling, hardware, and instructions to guide you through the installation and the operation. Now, if you happen to have any other questions, whether it's about this kit or anything that we have here at etrailer, don't hesitate to reach out to us because ultimately we wanna make sure that you're getting exactly what you need. Well, again, my name is Andy.
Thank you for joining me.
Website was easy to navigate and find what I needed. The product descriptions were very helpful. It was easy to place the order and within one day the order was filled and on its way.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.