Hole Dimensions in U-Bolt Plates 117535-G and TRTP175173

Updated 01/30/2017 | Published 01/28/2017

Products Featured in This Question

U-Bolt Plate for 1-3/4" Round Axle - 1-3/4" Wide Springs - 3/8" Bolts - Galvanized

(49)

$10.22

Replacement U-Bolt with Nuts for 1-3/4" Round Trailer Axles - 3/8" Diameter - Zinc Plated

(34)

$5.85

U-Bolt Plate - 1-3/4" Diameter Trailer Axle - 1-3/4" Wide Spring - 3/8" Bolts

(150)

$6.40

Question:

Where are the hole dim. specs. Also helpful if you say how thick it is. It appears to be thicker than TRTP175173 but same specs? You provide a lot of info except when I need it. Custom re-building old boat trailer with different axle setup. So make and model info worthless.

asked by: Darryl R

Expert Reply:

The four holes in the U-Bolt Plate parts # 117535-G and # TRTP175173 are sized to accept 3/8-inch u-bolts like # 175643-Z. I went to our warehouse and measured these plates' thickness and hole diameters and found them to be 1/4-inch and 0.4-inches respectively. Note that since these items are die-formed there can be slight variances between samples.

expert reply by: Adam R