Trailer LED Lights Not Working when Connected to a 2012 Mercedes ML350
Updated 01/23/2017 | Published 01/21/2017
Products Featured in This Question
Question:
Good day I have a 2012 ML 350 and just bought a caravan with Led lights. How can I fix it as the Leds domt work
asked by: Deon
Expert Reply:
This is a common problem with Mercedes vehicles and trailers that have LED lights. Basically the LED lights do not draw enough power for the vehicle to recognize they are there and sometimes they sense it as a burned out bulb so you might see an error message displayed in the vehicle.
One option is to use a special adapter, # C35FR for a 7- to 4-Way or # C57003 for a 7- to 7-Way. These adapters have load resistors to simulate incandescent bulbs so the LED lights will work.
If the Mercedes has something other than a 7-Way trailer connector (US style where the turn signals and brake lights are combined on the same circuits) then there is still a way to provide more load on the affected circuits. You can install load resistors such as # DI34ZR for a pair, on the trailer wiring. The load resistors will essentially simulate incandescent bulbs and allow the trailer LED lights to work when connected to the vehicle.
Product Page this Question was Asked From
ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Converter
- Universal Fit
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Trailer Wiring
- Shop: etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector
- Search Results: winch mounts for trailer
- Search Results: dust caps
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: trailer lug nuts
- Shop: 7-Way Trailer Adapter for Towing Trailers with LED Lights
- Shop: Brake Controller
- Q&A: Bearing Buddy and Bearing Kit Recommendation for 3,500 lb Axles
- Q&A: Do all 3,500 lb Trailer Axles Have the Same Bearings
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Shop: Curt Discovery NEXT Trailer Brake Controller w/ Custom Harness - Up to 4 Axles - Time Delayed
- Video: Curt Discovery NEXT Trailer Brake Controller w/ Custom Harness: The Breakdown
- Shop: Redarc Tow-Pro Elite Brake Controller w/ Custom Harness - Dash Knob - Off-Road Mode - Up to 3 Axles
- Shop: Load Resistor Kit for LED Turn Signals - 50 Watts - 6 Ohm - Qty 2
- Shop: etrailer Trailer Tool Box - A-Frame - Aluminum - 3.4 Cu Ft - 34" Long - Matte Black
- Q&A: Reverse Light PIn on a 7-Way Trailer Connector
- Q&A: Replacing 6-Way on Trailer With 7-Way Connector
- Video: Tuson Asymmetric Sway Control Manufacturer Breakdown
- Video: An In-Depth Look at the Quick Splices
- Video: What to Know About the Powerbuilt Deluxe Bearing Packer
- Search Results: 14 gauge wire
- Search Results: bearing grease
- Search Results: electronic sway control
- Search Results: bearing packer
- Video: An In-Depth Look at the Curt True Course Advanced Bluetooth Trailer Sway Control
- Q&A: Mercedes ML350 Does Not Work with a Trailer that Has LED Tail Lights
- Q&A: Trailer Wiring Harness for 2014 Mercedes GLK350
- Video: How to Choose a Trailer Brake Controller
on Custom Fit Vehicle Wiring
