Trailer Hub Recommendation for Spindle with Diameters of .75 and 1.25 inches
Updated 01/09/2017 | Published 01/08/2017
Question:
I cant seem to find the correct bearing sizes, My hub and wheel came off the other day, I have it all off and no ID anywhere. I need a new 5 on 4.45 hub with bearing sizes 1.250 inner and 0.750 outer. So It 1 1/4 ID inner and 3/4 outer.
asked by: Mark S
0
Expert Reply:
We have one hub that matches the criteria you mentioned. It is part # DX22XR. It has bearings with inner diameters of .75 and 1.25 inches plus has a bolt pattern of 5 on 4-1/2 inch.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- LM67048 / LM11949
- Standard Grade
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Q&A: Hub For Outer Bearing LM11949 & Inner Bearing LM67048
- Q&A: Availability Of Trailer Hub With .75" Outer And 1.25" Inner Bearings
- Q&A: Titan Replacement for Dico Trailer Idler Hub 17214
- Q&A: Trailer Idler Hub That Has a 5 on 4-1/2 Lug Pattern and Uses LM67048 and LM11949 Bearings
- Q&A: Replacement Grease Seal For a Trailer Hub Using LM11949 Outer Bearing and LM67048 Inner Bearing
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Q&A: Is 1.25" ID Bearing Too Large to Replace 1.19" ID Bearing?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Trailer Lighting Requirements
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Snow Tire Chain Overview: How to Buy the Right Tire Chains
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)