What Size Tires Will Take Tire Chains # PW2028C

Question

Question:

I have these Ladder style Tire chains. The cross links are 10inch in length and have a workable length of 68L. Is there a current size chart that would give a range of tire sizes that these fit?

asked by: JOHN A

0

Expert Reply:

If you have cables # PW2028C then they will fit the following tire sizes:

10-17.5
225/75-19.5
235/80-17
235/80-18
235/85-17
245/70-17.5
245/70-19.5
245/70-20
245/75-17.5
245/75-19.5
245/85-15
245/85-16
255/60-19
255/60-20
255/65-18.5
255/70-18
255/75-15
255/75-16
255/85-15
255/85-16
265/60-20
265/65-18
265/70-16
265/70-18
265/75-16
265/85-16
275/55-19
275/55-20
275/60-18
275/65-18
275/70-16
275/70-17
275/75-15
275/80-17
285/40-22
285/50-18
285/50-20
285/60-16
285/60-17
285/60-17.5
285/60-18
285/70-15
285/70-16
285/75-16
295/40-20
295/45-20
32x11.5-15
33x10.5-15
8.25-16

expert reply by: Michael H

0

Answer 1

When using tire chains, you definitely want to use them in pairs. For your FJ Cruiser, it is best to put them on the main drive axle, which is the rear axle. On most 4x4 vehicles it is generally acceptable to use chains on all 4 tires if you wish,…

view full answer...

Answer 2

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Answer 3

There are actually a couple differences between the Curt EZr #C619-648 and the Double Lock #C60712. The visible one will be that the safety chains on the #C60712 are not centered like the ones on the #C619-648. The difference that is not visible is…

view full answer...

Answer 4

Hey Michael, We have some hitch options available but I'll need a bit more information on your Silverado in order to find the correct fit. The available hitches are sectioned out by model (1500, 2500, 3500), bed length, and bumper type. If you…

view full answer...

Answer 5

Hey Eric, Using only 4 of the 5 mounting holes on #DE28YR is not recommended when installing new brakes. There is a chance of failure that could cause a lot more problems, it is best to install them exactly how they should be. With that said by far…

view full answer...

Answer 6

Hey Justin, thanks for reaching out! The Curt Trailer Hitch Receiver #C15312 will fit the long bed on your 2006 Chevy Silverado 2500HD so you're good to go!

view full answer...

Answer 7

We do have motors that you can add to your landing gear. For example, the Landing Gear Set #RVLG-8000 can be operated with the manual crank #RVLG-HDL but you can also add the motor #LC142178 and switch #LG-145236 for effortless operation on your end.…

view full answer...

Answer 8

In regards to the B&W Heavy-Duty Trailer Hitch Receiver part #BWHDRH25189, the distance from the flange to the top of the receiver tube is 3-1/8" and the distance from the rearmost mounting hole to the end of the receiver tube is…

view full answer...

Answer 9

You will want to find lights that match the lights you currently have on your trailer. If you have incandescent lights I recommend either staying with incandescent or swapping out all of the lights to LEDs. LED lights draw much less power, so you may…

view full answer...

What Size Tires Will Take Tire Chains # PW2028C

Product Page this Question was Asked From

Continue Researching