Trailer Wiring Harness for a 2002 Toyota Sequoia without Factory Tow Package
Updated 12/12/2016 | Published 12/11/2016
Products Featured in This Question
Question:
Do you have the trailer wiring for a 2002 Toytota sequoia without the factory tow package? I cant find that wiring anywhere. Many firms offer the hitch, but none offer the wiring. Please help. Thanks
asked by: Richard A
Expert Reply:
It is possible that all 2002 Toyota Sequoia models were pre-wired for a trailer connector. You can look to see if yours has the factory plug to install a harness such as # C55246. It will be located on the driver's side plugged into a dummy plug behind the rear bumper. I included a picture that should help identify it.
If that plug is not present on your Sequoia or it does not have any power then you can hardwire in a 4-Way flat trailer connector. I recommend ZCI harness # 119250KIT because with it you will not have to splice into the vehicle wiring for installation.
Product Page this Question was Asked From
Hopkins Plug-In Simple Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- No Converter
- Factory Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Visible
- Hopkins
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Wiring
- Video: Mount: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package on a 2001 Toyota Sequoia
- Article: Trailer Wiring Diagrams
- Video: How to Install: Curt Trailer Hitch Receiver on your 2001 Toyota Sequoia
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Shop: Front Mount Hitch
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: Hopkins Plug-In Simple Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic, Elite, or Liberty Trailer Brake Controllers
- Shop: Curt Mounting Bracket for 7-Way Connector Plug
- Shop: Catalytic Converters
- Q&A: What is the Hardware Size Included with Curt RV Bumper 2" Trailer Hitch Receiver Item # E-100
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: All About the Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package
- Q&A: Troubleshooting 4-Pole Connector Not Testing for Turn Signals on 2002 Toyota Sequoia
- Q&A: 5-Pole Flat Trailer Connector for 2001 Toyota Sequoia
- Q&A: Do All Models of 2001 Toyota Tundra Have Tow Package Connector at Rear of Vehicle
- Q&A: Parts Needed to Install 7-Way and Brake Controller in 2002 Toyota Tundra
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Trailer Hitch And Cargo Carrier With Increased Ground Clearance For 2021 Toyota RAV4
- Q&A: How To Mount 7-Way Trailer Connector On 2017 Lexus LX 570
- Article: Rooftop Cargo Carriers
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Measure for Trailer Hitch Drop