Equal-I-Zer Weight Distribution is Too Stiff; Can Lighter Bars be Used in the Same Head
Updated 12/09/2016 | Published 12/08/2016 >
Question:
I bought the 1200/12000 equalizer hitch and it is a little too stiff for my trailer GVRW 7700#, TW 800#. Could I use the slightly smaller sway arms in my 12k hitch head since the opening is only slightly bigger 1/8? This would save me from having to repurchase an entire hitch system.
asked by: Derrick
Expert Reply:
The different size Equal-I-Zer systems have heads to match the bar sizes so the parts are not interchangeable. But not to worry, with some adjustment you can soften it up a little and not have to use a different system. You will need to lower the tension on the spring bars. To do this you can angle the head towards the trailer and/or mount the parts of the brackets that hold the spring bars one slot lower. This will lower the tension and soften up the ride. Try this first instead of going to a whole new system.
Product Page this Question was Asked From
Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 1,000 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 1000 lbs TW
- Square Bars
- Equal-i-zer
- Equal-i-zer
more information >
Continue Researching
- Shop: Suspension Enhancement
- Shop: Timbren Rear Suspension Enhancement System
- Shop: Replacement Spring Bars for Blue Ox SwayPro Weight Distribution System - 2,000 lbs TW
- Shop: Replacement Spring Bars for Blue Ox SwayPro Weight Distribution System - 750 lbs TW
- Q&A: Does a Trailer have to be towed Level or Can it be Off Up or Down
- Q&A: Can a Trailer Ride With the Tongue at an Upward or Downward Angle
- Q&A: How To Determine Blue Ox Spring Bar Weight Capacity
- Search Results: 01003600
- Q&A: Replacement Grease Seals for Dexter Part # 010-036-00 on a 7,000lb Trailer Axle
- Q&A: Comparing TruRyde 10-36 Grease and Dexter 10-63 Oil Seal
- Video: Grease Seals 10-36 (pair) Feature Review
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Shop: etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches - Vinyl Coated Steel
- Shop: Timken 412920 Grease and Oil Seal - I.D. 2.250" / O.D. 3.376" for 5.2K, 6K, and 7K Axles
- Shop: Blue Ox Hitch Receiver Immobilizer II - 2" Hitches
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Choosing the Right Vehicle Suspension Upgrades
- Shop: Brake Controller
- Search Results: trailer jack

