How Do You Match a Key to Pop & Lock Tailgate Lock with BOLT Codeable Locks

Question

Question:

How do I have to do to recode the key cylinder, do I have to bring it to a locksmith? Thank you.

asked by: Alex

1

Helpful Expert Reply:

Pop & Lock tailgate lock # PAL5400 uses BOLT codeable locks. All you have to do is insert the vehicle key in the lock and turn it clockwise until it stops turning. Then remove the key. It's as easy as that. Your key will now unlock your tailgate.

expert reply by: Michael H

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 4

Hi Steve; the factory hitch on the 2013 Tacoma has the bumper brackets integrated into the hitch. You can replace it with the etrailer Trailer Hitch #e98850 but you will have to remove the old hitch and find new bumper brackets to complete the…

view full answer...

Answer 5

The aftermarket hitches for a 2011 Toyota Tacoma don't fit alongside the factory installed hitch; some trucks have hitches you can add on to OEM hitches that fit underneath the original. So I can't see any reason why you wouldn't be able…

view full answer...

Answer 6

Yes, it does John. The OBD2 is the diagnostics port that repair shops and inspection places use to connect to your 2012 Tacoma's computer. The electric brake control harness on your 2012 Toyota Tacoma will be located underneath the drivers side…

view full answer...

Answer 7

The correct Pop and Lock tailgate lock for your 2013 Toyota Tacoma with a backup camera is the part #PAL5400 which comes with a lock cylinder that will allow you to key to your truck's key. I attached an install video for this for you to check…

view full answer...

Answer 8

Yes, the Pop and Locks tailgate locks we offer for your 2015 Toyota Tacoma will work on the models that have back up cameras including the part #PAL8550. I attached a link to all the locks we offer plus an install video for you to check out as well.

view full answer...

Answer 9

Hey, Andrew! If you have the inside bed rails, you won't have to do any sort of modifications to be able to install the Extang Trifecta Signature 2.0 tonneau cover part #EX94915. The Instructions will go over how to install the cover if you do or…

view full answer...

Answer 10

Yes, the Replacement Lock Core for Pop & Lock Tailgate Lock #PL5400CONV for the Pop & Lock Custom Locking Tailgate Handle - Manual #PAL5500 will work great with your 2012 Toyota Tacoma TRD Sport with a backup camera. If you check out the…

view full answer...

Answer 11

The Pop & Lock Custom Locking Tailgate handle #PAL5500 will fit your 2014 Toyota Tacoma but you will need this mounting clip #PL5455CAMB to relocate your backup camera. I've included some videos for you to check out and see how it installs!

view full answer...

Answer 12

I called my contact at Covercraft and asked about the bucket seats you have in your 2011 Tacoma TRD. They told me that if the passenger front seat will fold forward completely flat, those are not sport bucket seats. The sport bucket seats will not…

view full answer...

How Do You Match a Key to Pop & Lock Tailgate Lock with BOLT Codeable Locks

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching