Result: bed step

Hey Kyle, So there is still a way to tow a 5th wheel trailer with your 2023 Ram 2500 and the Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch #C60633, base rails won't fit with that gooseneck because they'd interfere with each other. So…

If you're looking for a great weight distribution hitch with sway control that isn't going to make a ton of noise like standard friction sway bars typically do then I recommend the Blue Ox SwayPro Weight Distribution w/ Sway Control #BXW0756.…

We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…

You'd be fine to have a weight distribution installed on your trailer as you travel on the hill you described. If anything it might help prevent the trailer from leaning excessively. For a 6,000 lb trailer you'd be looking at a tongue weight…

We do offer a front hitch that will be a good fit for your 2021 F-350 Super Crew 8' bed Dually 7.3 with a gas engine. The EcoHitch #306-x7904 is not going to fit a dually truck. Instead, we recommend the EcoHitch #EH83GR, which is basically made…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Great questions! The Elevate Rack System is available outside of the TruXedo website - we are a great example of that. The TS Rails for TruXedo Elevate Rack System #TH65FR are compatible with a handful of tonneau covers: BAK: G2, MX4, Revolver X2,…

I do have options for you but if you were using the lower most hole on the hitch ball for the Andersen Ultimate Connection 5th Wheel Trailer Hitch part #AM3200 then that is going to be your max height for this hitch as they do not make a taller ball…

I spoke with Yakima and they informed me the dimensions of the Yakima MajorShady 270 Awning part #Y82AV while closed are approximately 90" long. The bolt spacing at the rear is 4-1/2" for the clamp to the awning and 3-1/2" on the bar.

Typically a trailer axle will have some camber in it - some bend - such that when it is not loaded the tops of the wheels bow outward slightly, with the outside edges of the tire treads making first contact with the ground. This allows that when the…

Your 2017 Thor Hurricane 29M is built on a Ford F53 chassis. For the Sumosprings, I recommend the SumoSprings Rebel Custom Helper Springs - 2 Piece - Front Axle #SSF-170-40-2 and the SumoSprings Maxim Custom Helper Springs - Rear Axle #SSR-187-40-1.…

The Timbren Rear Suspension Enhancement System part #TGMRCK25D which is a fit for a 2018 GMC Sierra 2500 will measure 5-1/4" tall without the 1" spacer or 6-1/4" tall with the 1" spacer. I have attached a photo below. The springs…