Recommended Hub Assembly For Snowmobile Trailer With Dexter EZ-Lube Axle
Updated 11/30/2016 | Published 11/29/2016
Products Featured in This Question
Question:
I have a 2004 Blizzard aluminum tilt snowmobile trailer, single axle, 101x10 w/ clamshell, 10inch tires, lugs 5 on 4.5. I need new hubs but short of taking the old ones off I cant find any data bearing sizes to confirm what I need BTR or BT8. Only thing manufacturer would tell me is we have the parts and its just a dexter 2200# axle. it is the ez lube axle. Thank you.
asked by: Todd
Expert Reply:
The hub assembly we offer for a 2,200-lb EZ-Lube axle is part # 8-259-50UC1-EZ. This hub has a zinc plating that makes it great for snowmobile trailers or boat trailers. The Inner bearing and race, outer bearing and race, grease seal, grease cap, and galvanized lug nuts are included.
The # L44649 inner and outer bearings have a 1.063 inch inner diameter. The # RG06-020 seal has a 1.5 inch inner diameter and 1.987 inch outer diameter.
The bearing kit that will work with this hub is part # BK1-150.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L44649 / L44649
- Marine Grade
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized
- Search Results: wheel and tire
- Q&A: Replacement Axle for Dexter Torsion 2,200 lb Axle on 2005 Blizzard 10T Snowmobile Trailer
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: All About the Dexter Trailer Idler Hub Assembly for 2,200-lb E-Z Lube Axles
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Search Results: trailer jack
- Shop: Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Search Results: trailer hubs and drums
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Search Results: trailer lights
- Shop: Brake Controller
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: spare tire mount
- Search Results: trailer axles
- Q&A: Recommended Idler Hub Kit w/a 5 on 4-1/2" Lug Nut Pattern for 2,200 lbs Axles
- Q&A: How Are Shackle Bolts Measured?
- Q&A: Does The Hub Saver Wheel Protector Replace The Spindle Washer?
- Q&A: Will The Hub Saver HS79FR Keep The Hub In Place If The Castle Nut Comes Loose?
- Q&A: Does The Kenda Karrier KR35 ST175/80R13 Tire w/AM03 Wheel Come With A Center Cap?
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: What To Look For When Buying Ratchet Straps
- Article: Trailer Brakes Not Working? Troubleshooting Guide