Steering Stabilizer for a 2004 Holiday Rambler Ambassador 36PST

Question

Question:

Hi. I have 2004 holiday rambler ambassador 36 pst what parts do I need for Steering Stabilizer for my m h. thank you,

asked by: Yong K

0

Expert Reply:

It looks like your 2004 Holiday Rambler Ambassador 36PST was built on a Roadmaster chassis. if the chassis is the Air Ride or Monaco model (except with Dana Spicer front axle) you would need to use steering stabilizer # RM-RBK6-RSSA. If it is a model with a straight axle with leaf spring suspension use # RM-RBK8-RSSA.

You can verify the chassis by providing the VIN number to Holliday Rambler.

expert reply by: Michael H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 6

Welcome back Steve. To add a rear sway bar to your 2026 Tiffin Allegro 29na, I recommend the Roadmaster Rear Sway Bar item #RM25VR. This is the thickest sway bar that fits your motorhome. It measures 1-3/4" in diameter and is made of high-grade…

view full answer...

Answer 7

Hey Brent, thanks for reaching out! Yes, you're on the right track. The Roadmaster Rear Anti-Sway Bar #RM46GR is the correct option for your 2016 Ram 3500 4x4 long bed without a factory rear sway bar. Just keep in mind this kit is designed for…

view full answer...

Answer 8

According to Roadmaster's fitguide your Magnum Beaver chassis would need the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes #RM-RBK6-RSSA.

view full answer...

Answer 9

Hey Shawn. The 1-1/8" Diameter Hellwig Sway Bar item #HE73GR is going to reuse the factory end links on your 2014 Ram 2500 and is designed as a simple replacement for the stock sway bar. I recommend installing the thicker 1-1/4" Diameter…

view full answer...

Answer 10

Hi Todd, I know exactly the feeling you’re describing, and you’re definitely not alone. That floaty, pushy feeling at highway speeds, especially when trucks pass, is really common on the Sprinter 3500 chassis with a taller coach like your Tiburon,…

view full answer...

Steering Stabilizer for a 2004 Holiday Rambler Ambassador 36PST

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching