Recommended Replacement Axle For Carry-On 6 X 12 Utility Trailer
Updated 10/24/2016 | Published 10/21/2016
Products Featured in This Question
Question:
Hi I have a question regarding a 3500 pound axle for my 2015 carry-on 6x12 utility trailer. I currently have a Dexter 3K8874 axle without brake flanges and I would like to upgrade the axle to a 3500 pound axle with the electric brake kit similar to 35545E-ST-89. Would you happen to have a axle with electric drum brake kit that will work with my application? Thank you
asked by: Jarred R
Expert Reply:
To make sure you get the right replacement axle on your Carry-On trailer you need to know a couple thins. First you need to know the spring-to-spring measurement. Then you need to know the hub face to hub face measurement.
The Dexter Trailer Axle w/ Electric Brakes, part # 35545E-ST-89 has a spring-center-to-spring-center length of 74-inches and a hub-face to hub-face measurement of 89-inches. If these measurements match your trailer then this would work great for you.
If the measurements do not match I recommend the Timbren Axle-Less Trailer Suspension System, part # A35RD545E. This system has a 3,500-lb weight capacity and comes with the electric brake hubs with a 5 on 4-1/2 bolt pattern. This system also comes with a 4-inch drop for lower deck height.
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Search Results: spare tire mount
- Search Results: stabilizer jack
- Search Results: reflectors
- Search Results: grease
- Search Results: jack footplate
- Search Results: jack footplate
- Video: Hands-On with the Peterson Conspicuity Reflective Tape
- Search Results: trailer jack
- Shop: Round A-Frame Trailer Jack - Topwind - 14-3/4" Lift - 2,000 lbs - Black
- Shop: Stabilizer Jacks - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 2
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Dexter Multipurpose High Temperature Lithium Grease - 1 lb
- Shop: Tie Down U-Bolt Spare Tire Mount w/ Brackets - 4 and 5 Lug Wheels - 8" - 15" Tires
- Q&A: Recommended Jack for a 5 x 10 Utility Trailer
- Q&A: Replacement Trailer Jack With Caster for Zeiman Jet Ski Trailer
- Q&A: Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
- Q&A: Replacement Trailer Jack for Sundowner Horse Trailer
- Q&A: How to Measure for the Correct Replacement Trailer Axles
- Q&A: Recommended Axle Replacement On A Carry-om 6x12 Utility Trailer
- Q&A: Replacement Jack Options For a 2012 Casita Spirit Deluxe
- Video: Breaking Down the Square Pipe Mount Swivel Jack w Footplate
- Video: Breaking Down the Single Rocker Switch
- Video: A Closer Look at the Square Pipe Mount Swivel Jack w Footplate
- Video: All About the Dexter Idler Trailer Axle w/ Hubs
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Trailer Axles
