How to Convert Dexter 10k Drum Brakes to Electric Over Hydraulic Disc

Updated 03/19/2024 | Published 09/27/2016

Products Featured in This Question

Dexter Trailer Idler Hub Assembly for 10,000-lb Axles - 8 on 6-1/2 - Oil Bath

(54)

$492.57

Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional

(2776)

$159.43

Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes - 1,600 psi

(234)

$1162.05

Hydrastar Hydraulic Brake Line Kit - Single Axle - 25' Long, 3/16" Main Line

(6)

$153.84

Question:

Hello, Im trying to find out what all do I need to converting my now electric drum 10k brakes to electric over hydraulic disc brakes. Plus my axles are oil bath... Can you please help me with this complete project...?? Thank you

asked by: Jay

Expert Reply:

We have just what you would need. For idler hubs you would first need to start with the part # 8-214-5UC1 (if you don't have these already) and then to install a disc brake kit specifically for these hubs you would need the part # K2R1058D11 for each axle. This is a Dexter 10k oil bath setup just like what you have.

For an electric over hydraulic drum actuator for your trailer you would want the part # HBA16-252-82. That comes with everything electronically.

For a 30 foot long tandem brake line kit you would need the part # HS496-251.

On your truck you would need to have a brake controller installed on it that is compatible with electric over hydraulic brake setups like the Prodigy P2 part # 90885.