Recommended A-Frame Jack  

Yes, the leg foot plate part #JF-1005H-Z does fit the Ram Sidewind jack part #TJA-5000S-B.

I checked and although there is not a bushing for the Bulldog Swivel Jack - Topwind #BD178101, we do have a 5,000 lb Bulldog A-frame jack with a short retracted height that is going to be exactly what you need. The Round A-Frame Trailer Jack -…

I just went out to the warehouse and checked. The Drop Leg for etrailer and Ram Jacks Footplate item #JF-1005H-Z fits perfectly with the etrailer A-Frame Round Jack item #TJA-5000S-B.

I reached out to my tech contact and confirmed that the Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs #TJD-7000S-GR is the same gear kit used in the Square A-Frame Jack w/ Footplate - Drop Leg - Sidewind -…

The etrailer.com Round A-Frame Trailer Jack #TJA-5000S-B that you referenced does not include a footplate. This is actually not all that uncommon, as it simply allows you to choose the type of base you want (footplate or caster wheel) or use a base…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…