Will a Curt Weight Distribution Shank Work with an EAZ Lift Weight Distribution System
Updated 08/26/2016 | Published 08/25/2016
Question:
The holes on this draw bar match with the eaz lift head I currently have. Is this the best replacement draw bar for a 2 1/2inch receiver for an eaz lift head rated at 12,000lb/1200 TW?
asked by: Steve P
Expert Reply:
If the 3/4 inch diameter holes space 1-1/4 inches apart on center on shank # C17131 match what your EAZ Lift weight distribution system requires then it is a great option for a 2-1/2 inch hitch. Most major brands of weight distribution systems use the same hole spacing and diameter to mount the heads with few exceptions.
This shank has a maximum rise of 6 inches and maximum drop of 2 inches. If you need more rise or drop to tow the trailer level you can look at the selection of 2-1/2 inch shanks I have linked for you.
Product Page this Question was Asked From
Curt Weight Distribution Shank for 2-1/2" Hitches - 6-3/4" Rise - 3-1/4" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2-1/2 Inch Hitch
- Round - 3 Inch Drop
- Trunnion - 2 Inch Drop
- Round - 6 Inch Rise
- Trunnion - 6 Inch Rise
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: weight distribution shanks
- Search Results: weight distribution shank drop
- Search Results: weight distribution drop shank
- Video: Set up: Equal-i-zer Weight Dist Shank on a 2013 Ford F-250 and F-350 Super Duty
- Video: Review of the Curt Welded Weight Distribution Shank 7"
- Video: How to Install the Curt Welded Weight Distribution Shank 7" on a 2017 Chevrolet Silverado 2500
- Shop: Curt Weight Distribution Shank for 2" Hitches - 7-3/8" Drop - 11-1/2" Rise
- Shop: Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Shop: Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop
- Shop: RV Exterior Lighting
- Shop: 12V LED RV Dome Light - Single - 3" Long - Chrome Trim
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Rise, 4" Drop
- Shop: Curt Weight Distribution Shank for 2-1/2" Hitches - 6-3/4" Rise - 3-1/4" Drop
- Video: Detailed Breakdown of the Curt Weight Distribution Shank for 2-1/2" Hitches
- Q&A: Compatibility of Curt C17131 Shank With Eaz Lift Weight Distribution Head
- Q&A: Is Curt Weight Distribution Shank Compatible with Equalizer Weight Distribution Shanks
- Video: Feature Review Fastway e2 Weight Distribution w/ 2-Point Sway Control
- Q&A: Is There 2.5 inch Shank That Can be Used with Curt 20 TruTrack WD System
- Q&A: What is the Bolt Hole Spacing and Diameter of the 2-1/2 Equal-i-zer Weight Dist Shank FA88FR?
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Brake Controller Install Harness that Fits 2023 Jeep Grand Cherokee L
- Q&A: Can The Curt MV Weight Distribution System Be Used With Curt Deep Drop Ball Mounts?
- Q&A: What do Trailer Acronyms GTW and TW Mean
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Trailer Lighting Requirements
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size