Trailer Hub Grease Seal Recommendation that has Inner Diameter of 1.688 Inches

Question

Question:

My trailer seal race measures 1.688. Do I use the seal that measures 1.719 or is there a seal for the 1.688 shaft.

asked by: Guy W

0

Expert Reply:

For a grease seal that has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches you would want the part # 168233.

If you need a different outer diameter email me back and I will see what we have that would fit.

expert reply by: Jameson C

0

Answer 1

Hey Jeff, thanks for the information. It sounds like you need the Double Lip Seal for 3,700-lb Marine Hubs item #168255TB. It fits a inner diameter of 1.687" and an outer diameter of 2.561". What kind of trailer do you have?

view full answer...

Answer 2

We only have one seal that matches the inner and outer diameter you need and that is the part #168233 that you referenced. It may not be quite as wide as your current seal but it still will fit the hub and work well. I have attached a photo of the…

view full answer...

Answer 3

Hi Jeff; with those measurements you can use the Double Lip Seal for 3,700-lb Marine Hubs #168255TB. This is the same as the Rockwell American seal you found but it is made by Dexter. The inner diameter is the same and the outer diameter is…

view full answer...

Answer 4

Yes, the CE Smith Trailer Hub part #CE13511 will fit as a replacement for your DICO hub 45264 but you will need to use a different seal as we have found that your spindle diameter is slightly different which means you need the #168255TB as well.

view full answer...

Answer 5

We have just what you need based on the dimensions you listed. The correct grease seal you need is the part #168255TB which has outer diameter of 2.561 and an inner diameter of 1.687 inch.

view full answer...

Answer 6

A 3500 lb axle will typically use a 10-19 grease seal with an outer diameter of 2.565 and an inner diameter of 1.719 inches. This is pretty easy to confirm. If your inner bearing is an L68149 model, the seal outer diameter would indeed be 2.565. If…

view full answer...

Answer 7

I called Lippert and they informed me of the grease seal dimensions for your 3,500 lb axle. The correct replacement grease seal for you is part #168255TB.

view full answer...

Answer 8

According to Dexter, this is a 3,750 lb torsion axle with a 90.3" hub face measurement. More than likely your axle uses #L68149 and #L44649 bearings with a #168255TB grease seal. You will need to verify this information since Dexter did not have…

view full answer...

Answer 9

The Trailer Idler Hub Assembly part #AKIHUB-545-35-G-K or part #AKIHUB-545-35-G-EZ-K for easy grease will be a direct replacement for the TDE 46210. That said, you may also need the Double Lip Seal part #168255TB since that hub can use two different…

view full answer...

Answer 10

We have the Dexter Axle Double Lip Seal for Marine Hubs #168255TB which has the 1.68 inch diameter you need along with the 2.56 inch inside hub diameter you need.

view full answer...

Answer 11

There are 2 ways to figure out exactly what you need Chris as I cannot look up parts for your 2004 EZ Loader boat trailer based on just a model. If you have the VIN you or I can contact EZ Loader to verify the correct bearings and seals used on your…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Trailer Hub Grease Seal Recommendation that has Inner Diameter of 1.688 Inches

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching