Replacement Grease Seal for Lippert 3,500 Lb Axle SN: 045-002688794  

The bronze bushings and wet bolts are a great option but they still do require maintenance especially under the conditions you referenced. There really isn't any new information in comparing it is basically the difference between maintenance…

Unfortunately Larry, the never fail bushings were discontinued a few years ago which is why you are unable to find them on our site. As for the MORryde CRE3000 Rubber Equalizers #MR87ZR you can use them on your 2021 Grand Design Imagine XLS 22MLE…

The correct MORryde Shock Absorbing Suspension Equalizers for a 2022 Grand Design Imagine XLS 22RBE is part #MR27ZR. The correct MORryde Suspension Upgrade Kit is part #MR46ZR. These are both great options to upgrade your suspension allowing for a…

The hangers you currently have on your trailer are ones I have run into before. That being said, I spoke with MORryde and the #MR27ZR will still fit your trailer, but there is a modification that will need to be made. You’ll have to trim according to…

The correct bearings, races, and seals for your 2021 Grand Design Imagine XLS 17MKE is the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles part #BK2-100.

Thank you for the dimensions of your current equalizers. Based on that the correct MORryde kit would be the #MR27ZR and not the #MR87ZR.

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

As your axles measure 35" apart from center to center but the frame hanger spread (FHS) measured 58-3/4", you did go the correct way. The axle spacing is definitely important, but the FHS is more so. Just be aware that you axle spacing may…

Yes, you can install the MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K item #MR27ZR by lifting up one side of the trailer at a time. You don't have to have sides of the axle off of the ground at…

It is possible that the MORryde Shocking Absorbing Equalizers #MR27ZR and Wet Bolt Kit #MR46ZR you were looking at will fit your 2020 Grand Design Reflection 337RLS, but the only way to be sure will be measuring what is currently installed on your…

In my experience the MORryde equalizers like part #MR27ZR tend to be the best option, with the Lippert Road Armor equalizers coming in second and the Dexter equalizers coming in last place in terms of long term quality. Most of the Dexter parts…

I have an attached photo which illustrates the dimensions of the E-Z Flex Heavy Duty Rubber Suspension System, part #K71-653-00 you inquired about. As you can see on the photo, the distance from the outer mounting hole on the arm of the equalizer to…