Distance from RV Frame to First Step for the Torklift Glow Steps

Question

Question:

When the A8004 is installed in a trailer 266RDS SnowRiver, and the steps are deployed, what is the distance from the Torklift mounting bracket to the top of the first step? I am trying to minimize the height of each step getting into the trailer.

asked by: Russell S

0

Expert Reply:

I spoke with my contact at Torklift and he informed me that from the mounting surface of where the Torklift Steps part # TLA8004 attaches down to the first step measures 3 inches in the highest setting.

He also said that there is a 3 way adjustment you can make for the position of the step that will change that distance. Highest is 3 inches, middle is 5 inches, and lowest is 7 inches.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I pulled up pictures of your Grand Design 303RLS and it looks to have a pull out style 3-step on it so for a replacement that will be as cost-effective as possible the part #LC432690 would be what you'd want. This can either bolt or weld to the…

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 6

Hey Matt! The Hellwig Load Pro 35 Heavy Duty Helper Springs #HE93XR are only designed to give you additional support while towing/hauling. Aftermarket suspension enhancement cannot increase the capacity of your 2024 Silverado 2500. The only way to…

view full answer...

Answer 7

Hey Woody, For your 2025 Grand Design Reflection 337RLS, I don't think you'll have any trouble getting either the MORryde RV Cargo Slide Tray - 72" x 39" - 2 Way Slide - 80 Percent Extension - 500 lbs #MR33FR or the MORryde RV Cargo…

view full answer...

Answer 8

Hey Jonathan. If you're wanting to have an airbag set up alone with a 5th wheel hitch, you will want to get a FIrestone kit. The Airlift kit you asked about, part #AL88341, will not be able to be installed along side a 5th wheel, or gooseneck, as…

view full answer...

Answer 9

Hello Theresa, Yes, the TorkLift GlowStep Revolution #TLA8002 will work on your 2022 Forest River Aurora 18BHS based on the measurements you provided. Your 24 inch ground clearance is right within the operating range for the 2-step #TLA8002, and the…

view full answer...

Answer 10

Hey Randy! I can definitely set you up with air bags and a compressor. I recommend Firestone since they make the most durable and reliable air bags. For a complete kit with an air compressor you can choose from the following: -Firestone Ride-Rite Air…

view full answer...

Distance from RV Frame to First Step for the Torklift Glow Steps

Product Page this Question was Asked From

Continue Researching