Will Trailer Valet XL Work with Bulldog Couplers

Question

Question:

Will it work with a Bulldog hitch?

asked by: Wayne S

1

Helpful Expert Reply:

Yes, the Trailer Valet XL Trailer Dolly # TVXL2 that you referenced would fit and work well with a Bulldog Collar Lok style coupler.

expert reply by: Jameson C

1

Answer 1

From the picture that you sent (thank you for that) and the way that you are describing that the Trailer Valet XL #TVXL2 is moving I would have to say that you might not be installing the Trailer Valet XL properly on your coupler. I have attached a…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

Hey Chris, congrats on the new trailer! I've got two trailer dolly options that are going to work great with your 8,800 lbs 2026 Airstream Classic 28. One is a manual and the other is electric. Manual - Trailer Valet XL Trailer Dolly with Chain…

view full answer...

Answer 7

Trailer Valet actually has a dolly/jack that is designed for attaching to the coupler like you mentioned. For that you'd want the part #TVXL25 for if you have a 2-5/16 inch hitch ball or part #TVXL2 for if you have a 2 inch hitch ball size. I…

view full answer...

Answer 8

The RhinoEXTREME RV Sewer Hose w/ Swivel Fittings #CAM39861 referenced in your question is essentially an upgraded version of the RhinoFLEX hoses, such as #CAM39761. The primary difference is that the RhinoEXTREME features a thicker sidewall that…

view full answer...

Answer 9

For your Yakima 66 inch Rack and Roll Trailer #Y08106, I recommend the Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 1,000 lbs TW #TVXL2. This tow dolly will use chain driven solid rubber tires to help you move the trailer up…

view full answer...

Answer 10

Hey Ed! If you're installing the Buyers Products Hook and Keeper #BP64FR on Azdel sidewalls, I recommend using hollow-wall style anchors if there is no aluminum or wood framing behind the panel. If you can mount into framing, a stainless steel…

view full answer...

Answer 11

Hey Ryan, thanks for reaching out. The Ark Xtreme Off-Road Swivel Trailer Jack #ORJW750BD swivel plate jack is a really solid setup, but there isn’t an adapter available to convert it to work with an existing pipe mount or turn it into a…

view full answer...

Will Trailer Valet XL Work with Bulldog Couplers

Product Page this Question was Asked From

Continue Researching