Replacement Handle Recommendation for a Bulldog 190 Series Square Tube Jack

Question

Question:

Hello, I have a Bulldog jack. Square tube, side winder. The label says it is a 5k lift, 7K static jack. Is your cat # BD500171 handle the correct replacement for my Jack? Also, is my Jack considered a 5K or 7K. Do they rate them by static or lifting capacity? Thanks

asked by: Tony

0

Expert Reply:

Sounds like you have a 190 series Bulldog jack like the part # BD190751 as it matches your description. The replacement handle is the part # BD500171 that you referenced then.

They are typically rated by lifting capacity as that is what jacks are used for.

expert reply by: Jameson C

0

Answer 1

According to my technical contact at Bulldog, the handle on their Square Jack #BD190751 is intended to be installed on the one side as manufactured. This fixed-leg compact jack with heavy-duty footplate base welds directly onto your application and…

view full answer...

Answer 2

The reason you are having issues is that the Bulldog Jack you have, #BD195351 has a static capacity of 5000 lbs, which means that it can hold a maximum of 5000 lbs. The lift capacity of the jack is 3000 lbs, which explains why it becomes difficult to…

view full answer...

Answer 3

Hello Daniel. I have the perfect solution for you the Camco RV Rain Gutter Spouts with Built-In Extensions - Slide On - Black - Qty 4 #CAM42452. I included a review video so you can see how they work.

view full answer...

Answer 4

The correct replacement handle you need for your Bulldog 190754 which is a 8k square jack is the part #BD500171. I attached an install video for this for you to check out as well.

view full answer...

Answer 5

Hey Genny, the membrane that comes with the LaSalle Bristol RV Roof Replacement Kit w/ XTRM Membrane #344270KIT21 comes in a big roll. The thickness of the membrane is 27 MIL which makes it about .68 inch thick. Do you have any other questions? I…

view full answer...

Answer 6

We have two Bulldog jacks that use the square pipe mount attachment. We have the Topwind Swivel Jack, #BD195312, and the Sidewind Swivel Jack, #BD195362. Both of these jacks have a 15 inch lift, a 3,000 lb lift capacity and a 5,000 lb static weight…

view full answer...

Answer 7

We do have a bearing kit that includes the correct bearings and races for the Dexter 031-030-02 and 031-032-02 bearings, as well as the 010-036-00 grease seal. The correct kit is the following: - Bearing Kit #BK3-300

view full answer...

Answer 8

I can absolutely help you with this trailer. First, I recommend using the 7-Way Molded Trailer Plug with Junction Box #HS381-9000 along with ring terminals #44-5310A. This will easily allow you to convert your 4-way wiring and also add your trailer…

view full answer...

Answer 9

I do have several replacement parts available for the RAM Trailer Jack part #TJD-7000S but not an all inclusive rebuild kit. Instead you will need to select from the components listed below and repair the jack as needed. The most common fault on the…

view full answer...

Answer 10

We've got you covered. The overall length of the Replacement Connecting Rod #LG-XTB is 65-1/4". The inner diameter is 1" and the outside diameter of the rod is 1-3/8". I've also linked one of our review videos that gives these…

view full answer...

Answer 11

I have attached a helpful article that explains 4 methods for testing your electric brake magnets. You will need a multimeter like part #PT89ZR to check the amperage when testing the magnets. The article explains how to test the magnets while the…

view full answer...

Answer 12

I attached a picture of the mounting holes for the Bulldog Heavy-Duty A-Frame Coupler, #BD44150WH301 that you referenced for you to check out so that you can compare them to the ones on your current coupler. Based on the picture you submitted this…

view full answer...

Replacement Handle Recommendation for a Bulldog 190 Series Square Tube Jack

Product Page this Question was Asked From

Continue Researching