See what our Experts say about this Mighty Cord Shore Power Inlet

• Recommended MaxxFan Deluxe Roof Vent w/a Thermostat
  Hey Randy. I recommend the MaxxFan Deluxe Roof Vent item # MA00-07000K. This would be a great option due to it having a 10 fan speed settings, a powered lifting lid, and a thermostat that will keep your RV to the temperature you set. The included remote will allow you to completely control the fan settings and adjust the thermostat. I also recommend using the Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White item # 344270KITW to make sure you have a leak free install. For...
  view full answer...
• Replacement Power Inlet for a 2015 Prime Time LaCrosse Travel Trailer
  Hey Debbie, thanks for reaching out! We have kits like the B&B RV Electric Cable Hatch # BM85MR to help cover power inlets, but if you're looking for a cover that comes with an inlet, we unfortunately don't have those - you'll either need to use a hatch like what I just referenced, or you'll need to completely replace the inlet on your trailer. You're either going to need a 30A inlet, which we have in Black # A10-30INBKVP and White # A10-30INVP, or a 50A inlet, which we also have in Black...
  view full answer...
• Distance Between Mounting Holes of Mighty Cord Replacement RV Power Inlet
  The distance between each of the mounting holes on the Mighty Cord Replacement RV Power Inlet is 2-7/16", as you can see in the accompanying photo. This inlet comes in your choice of either Black # A10-50INBKVP or White # A10-50INVP.
  view full answer...
  
• How to Power a Winch on a Cargo Trailer
  Hey Tim, that's a nice trailer! Another way to power the winch on your 2017 Cargo Mate would be to have a large deep cell battery installed on the trailer that will power the winch and then use the 12 volt accessory circuit from the 7-way on your truck to put a maintenance charge on the battery. You could then run lights off of the same battery. Or and this is my recommendation, if you have a winch with up to a 16.5k capacity you could get the Trailer and Vehicle Electric Winch Wiring...
  view full answer...
• Are Mighty Cord Inlet part # A10-50INVP and Mighty Cord part # A10-5025EDBK Compatible
  Yes, the Mighty Cord Inlet part # A10-50INVP and the Mighty Cord part # A10-5025EDBK are compatible. They both use the twist lock style of connectors.
  view full answer...
• What Size Hole Saw for Installing Mighty Cord Replacement RV Power Inlet # A10-50INVP
  Hey Wayne, the portion of the outlet part # A10-50INVP that you referenced that sticks through the wall of the trailer is 2-1/4 inch in diameter so I would go with just a little larger than that for an easier install like 2-5/16 inch.
  view full answer...
• Power Inlet for DIY Build/Ambulance Camper Conversion
  If your electrical distribution system is not rated for 30 amps you should not be trying to plug into a 30 amp RV power pedestal at a camp site. From the attached images you are correct, you obviously have a 20 amp plug as it is clearly labeled for that rating. This does not mean your ambulance conversion project has a power distribution system rated only for 20 amps, just that your power cord is limited to such. In the RV world you primarily see a camper with either a 30 amp or, the...
  view full answer...
  
• Power Inlet Needed To Add Shore Power To An Enclosed Trailer
  If you're only wanting to setup AC service in your enclosed trailer then you could choose pretty much any 30 or 50 amp power inlet you wanted and then just run the appropriate gauge wire between the inlet and your panel. You can definitely install a 50 amp inlet and then just use a 50 amp to 30 amp adapter whenever you're at a site with only 30 amp service. You could use the Mighty Cord Replacement RV Power Inlet - White # A10-50INVP or # A10-50INBKVP for black. You'd need a minimum of...
  view full answer...
• Replacement 50 Amp Inlet Socket for RV
  What you sent in is a picture of a standard 50 amp socket seen on RVs. So for an exact replacement you'd want the part # A10-50INVP.
  view full answer...
  
• Recommended Power Transfer for Generator Connection on 5th Wheel Trailer
  The Furrion Transfer Switch - 50 Amp # F50ATS can be added to your 5th wheel trailer along with the 50 amp power inlet like # A10-50INVP or # A10-50INBKVP. Most generator inverters will use a 30 amp generator cord, so you will use the Mighty Cord Generator Adapter for RV Power Cord - 50 Amp Female to 30 Amp Twist Lock Male # A10-G30450VP and then power cord # A10-5025ED. This cord is the shortest we carry at 25 feet long. This combination will allow you to power your refrigerator from...
  view full answer...
• Replacing SmartPlug With Standard 50 Amp Inlet
  There is not an adapter to go from the SmartPlug to a twist-lock power cord, so what you'd have to do is replace the SmartPlug inlet with a standard 50 amp inlet, the Mighty Cord Replacement RV Power Inlet - Twist Lock - 50 Amp - White # A10-50INVP or Black # A10-50INBKVP. That would allow you to use a standard 50 amp power cord like the Mighty Cord RV Power Cord - 50 Amps - 25' Long # A10-5025ED90.
  view full answer...
• Recommended Mate for Might Cord # A10-50FDT Female 50 AMP Detachable Twist Lock Connector
  A great connector that is compatible with the # A10-50FDT you were looking at is the Epicord 50 Amp Twist Lock Power Inlet part # 277-000140. The one mentioned in the video just changed part numbers because it is now available in black # A10-50INBKVP and white # A10-50INVP. A great cover for the # A10-50FDT to protect it from the elements is the # A10-50ACV. I have linked all the above mentioned products to this page for your viewing and purchasing convenience.
  view full answer...
• Power Inlet Replacement Needed for a 2008 Keystone Everest
  I looked up the Macrino Easy Lock 125 - 250V inlet that you show in your picture and if you are looking to replace that then I recommend the Mighty Cord Replacement RV Power Inlet # A10-50INVP. This is rated for 125/250V, 50 amps, and features the Twist Lock which is the same as the Easy Lock. I have attached a review video that you can reference.
  view full answer...
  
• Recommended Control Center And Automatic Transfer Switch For School Bus Conversion
  I would be happy to make some recommendations for adding 12v and 120v power to your school bus conversion. I recommend the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger # PD4560K18LS8 which will be the central power hub for all of your electrical connections to be made. You will be able to hook up your shore power connector, generator connection, and will even work with solar power as you mentioned wanting to add in the future. The built in converter...
  view full answer...
• Can 50 Amp Power Inlet Support 240V?
  The Mighty Cord Replacement RV Power Inlet - 50 Amp Twist Lock - White # A10-50INVP will allow you to use a cable like Mighty Cord RV Power Cord with Handle - 50 Amp Male to Twist Lock Female Connector - 25' Long # A10-5025ED. The voltage flowing through these connectors can be the 240v you referenced as long as your RV transfer switch is rated for such. If you need that, I recommend the Progressive Dynamics Transfer Switch - Metal Case - 50 Amp - 120V/240V # PD52.
  view full answer...
• Difference Between Mighty Cord Replacement RV Power Inlet # A10-50INBKVP and # A10-50INVP
  The Mighty Cord Replacement RV Power Inlet - Black # A10-50INBKVP and the RV Power Inlet - White # A10-50INVP referenced in your question are indeed the exact same product except for their color. These male twist-lock plugs will both accept a 50-amp female twist-lock plug and feature a threaded ring that creates a weatherproof connection. They both measure 3-3/4 inches long and 3-5/8 inches wide. As you mentioned, your only choice between the two models will simply be your color preference. I...
  view full answer...
• Replacement 50 Amp Power Connectors for RV Use on 2016 Grand Design 303 Reflection
  The Furrion Replacement Connector for RV Power Cord # 381684 that you referenced is a female 50 amp RV connector replacement like it sounds like you are in need of. If you also needed a replacement socket the part # A10-50INVP would be what you'd need. The male and female designations for these connectors is a bit confusing as the socket side which you'd normally consider as female is the male side due to the prongs and the female side is the plug.
  view full answer...
• NEMA Number for Mighty Cord Replacement RV Power Inlet # A10-50INVP
  The NEMA number for the female side of the # A10-50INVP is NEMA L14-50. It is UL listed as well.
  view full answer...
• Replacement Power Inlet For Travel Trailer
  We have both 30 amp and 50 amp replacement power inlets so you can choose the application right for your travel trailer. These are available in either white or black with the following part numbers: - 30 Amp: Mighty Cord Replacement RV Power Inlet - Twist Lock - Black # A10-30INBKVP or White # A10-30INVP - 50 Amp: Mighty Cord Replacement RV Power Inlet - Twist Lock - Black # A10-50INBKVP or White # A10-50INVP
  view full answer...
• 50 Amp RV Inlet for Use with Power Grip Marine-Style Power Cord Adapter # CAM55542
  For a power inlet connector to match the 50 amp twist lock style connector on the Power Grip Marine-Style Power Cord Adapter # CAM55542 you'd want the # A10-50INBKVP for a black socket or the # A10-50INVP for a white socket.
  view full answer...
• Availability of Replacement RV Power Socket/Outlet
  Sounds like you are looking for something like the Mighty Cord Replacement RV Power Inlet # A10-50INVP which is designed for 50 amp twist lock connectors. We don't have just the door for this though. For 30 amp twist lock we have the part # A10-30INVP.
  view full answer...

Do you have a question about this Shore Power Inlet?