Bearing and Seal Recommendation for Installing Kodiak Hub KH84545S on MFI/Yamaha Trailer
Published 05/25/2016
Products Featured in This Question
Question:
I have an MFI/Yamaha trailer that has 5 on 41/2 hubs. The specs are as follows: Inner bearing: 68149 Outer bearing: 44649 Rear Seal: 168255TB Inner Race: L68110 Outer Race: L44610 This item ships with an inner race installed? that is a 68111 but I need an inner race 68110. Can this item ship with a 68110? Also, the grease seal I need is a 2.561inch OD x 1.687inch ID. Will this fit on this hub? Thank you,
asked by: Rob
Expert Reply:
The races of the part # KH84545S are installed but the bearings and seal are sold separately.
It calls for a # L68149 and # L44649 and then for a seal part # RG06-050 which all match what you say you need.
Product Page this Question was Asked From
Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Shop: Kodiak XL ProLube Kit for 3500-lb Axles
- Shop: Dexter Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet/KodaGuard - 3,500 lbs - Oil
- Q&A: Parts Needed to Install All Stainless EOH Disc Brake Components on Trailer with 3,500 Axles
- Q&A: Is an Oil Bath System Compatible with EZ Lube Spindle # TRU74FR
- Q&A: Stainless Steel Disc Brakes for 3,500 Lb. Axles with a 5 on 4-1/2" Bolt Pattern
- Q&A: Replacement EZ-Lube Grease Cap for Kodiak KH84545S
- Search Results: cotter pin
- Search Results: axle nut
- Search Results: spindle nut
- Search Results: spindle washer
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Q&A: Can Regular Grease Trailer Hubs be Converted to Oil Bath Hubs
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: Replacement Oil for 3.5K Kodiak Disc Brakes - 10" Hub/Rotor
- Search Results: hydraulic brake actuator
- Search Results: surge brake actuator
- Search Results: surge brake