Search: hydraulic brake actuator   >  

Hi Daniel, So I checked and Lionshead has discontinued the Jaguar 15x6 wheel so it's not something you'll be able to get. I hope you're not mad at me but the only option I can give you is to replace it with another wheel. For the same…

Hey Travis, thanks for reaching out! For standard replacement parts I recommend using the 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles #e57SR and the MORryde Suspension Upgrade Kit for Tandem Axle Trailers #MR46ZR. The leaf spring is…

The Lippert 5,200 lb axle you have has a hub face to hub face of 86.5 inches which is identical to the Dexter #8327816 you referenced, however the 68.5 inch spring seats of your Lippert axle are not identical to the 71.5 inch spring centers of the…

For lubrication that won't attract dirt and debris you'll want to use a white lithium solution like the LubriMatic White Lithium Grease #L11354. This grease will lube your Retrax Tonneau Cover's rails and help prevent corrosion without…

Based on the information I could find on your 2023 Jayco Jayfeather 30QB travel trailer it appears you are going to have 4,400lb axles. You are going to need to verify the diameter of your current axles as some manufacturers like Lippert use a…

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

Yes, there is! To replace your Atwood 61101 coupler, I recommend the Demco Hydraulic Brake Actuator w/ Electric Lockout item #DM62VR. This actuator is plated in zinc which means you won't have to deal with the actuator corroding. The Demco…

Yes we actually installed the Torsion Demco Brake Line Kit part #DM5425 on a leaf spring trailer like what you asked about. You can see how we did it in the attach picture. I attached an install video for this for you to check out as well.

Based on your information, the closest option we have in available inventory is the Bearing Buddy Bearing Protectors, Item #BB2047SS. These work with several outer bearing models and fit a 2.047 inch hub bore. Because of how close these dimensions…

Dexter doesn't put reverse lock outs on their drum brake actuators so you'd need to add the part #DM5404 do a new actuator. The part #DX97FR is just the inner section of an actuator though. For the actuator you'd need the part #DX33FR.

I have a solution for you but no, the Dexter Hydraulic Drum Brakes item #23-336-337 would lock up every time you backed your trailer up. You need free backing brakes like the Dexter Hydraulic Trailer Brake Kit - Free Backing - 12" - Left and…

Thanks for the pictures! It looks like you have a 3" x 5" channel so the Dexter DX7.5L A-60 Brake Actuator item #DX33FR will work for you. You will need to measure the width of the top of your channel to confirm this will fit.