Replacement Hub/Drum and Self-Adjusting Brake Assembly Recommendation for a Lippert 5,200 lb Axle
Updated 05/17/2016 | Published 05/14/2016
Products Featured in This Question
Question:
Hello, I have a 2012 Interstate 1 enclosed trailer with Lippert Components 5200 lb axles. I am looking to replace the brake assemblies and drums. What would be the part numbers you would recommend for self adjusting brake assemblies and for the drums. I believe they are 6 on 5.5 drums. Thanks
asked by: Drew
Expert Reply:
For a hub/drum that will fit your Lippert 5,200 lb axles you would want the hub part # AKHD-655-6-EZ-K that have the same 6 on 5-1/2 inch bolt pattern you said you have.
For a self-adjusting brake assembly for the right hand side you would want the part # AKEBRK-7R-SA and for the left hand side you would want the part # AKEBRK-7L-SA. That would be all that you would need.
I attached review videos for the hub and brake assemblies for you to check out as well.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 10~10 seal
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Shop: Grease Seal - Double Lip - 2.125" ID - 3.376" OD - Qty 2
- Q&A: Manufacturer of TruRyde Bearings and Seals
- Search Results: trailer hubs and drums
- Search Results: bearing 25580
- Q&A: Replacement for Grease Seals Labeled Dexter 10-10-B
- Video: Hands-On with the 10-10 Grease or Oil Double-Lip Seals
- Q&A: What is Proper Way to Torque Trailer Axle Spindle Nut
- Shop: Bearing Kit, LM67048/25580 Bearings, GS-2125DL Seal
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Q&A: Proper Torque Rating for Spindle Nut
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Search Results: trailer jack
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Brake Controller
on Trailer Hubs and Drums
