Will CE Smith Deep V Keel Roller Assembly # CE10401G Fit In 5-Inch Opening
Updated 05/10/2016 | Published 05/08/2016
Products Featured in This Question
Question:
I have a 5.25 inch space that I need to install a roller , will CE 10401G fit in that space or should I use a 4 inch roller ?
asked by: John M
Helpful Expert Reply:
I went to our warehouse and measured the CE Smith Deep V Keel Roller Assembly, part # CE10401G.
The roller bracket measures 5-1/2 inches wide. The width of the roller pin with the caps on is 6-1/4 inches. This roller assembly will not fit in the 5-inch opening you said you have.
I recommend you go with the 4 inch roller, part # CE10400G. The # CE10400G bracket measures 4-1/2 inches wide and is 6 inches long.
Product Page this Question was Asked From
CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel/Black Rubber - 5"
- Boat Trailer Parts
- Rollers
- Keel Roller
- 3 Inch Diameter
- Rubber
- 5 Inch Long
- CE Smith
more information >
Continue Researching
- Search Results: 5 keel roller
- Shop: CE Smith Bow Roller for Boat Trailers - Polyurethane - 3" Long - 1/2" Shaft
- Shop: CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel/Black Rubber - 10"
- Q&A: Recommended Keel Rollers to Replace Worn Rollers on Boat Trailer
- Video: Hands-On with the Trailer Square U-Bolts (Qty 2), 4-1/8" x 3" x 7/16"
- Video: Review of the CE Smith Deep V Keel Roller Assembly for Boat Trailers
- Video: A Closer Look at the CE Smith U-Bolt
- Shop: CE Smith U-Bolt - Galvanized - 4-13/16" Long x 2-1/16" Wide x 1/2" Diameter - Qty 1
- Shop: CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel/Black Rubber - 5"
- Shop: CE Smith Spool Roller Assembly for Boat Trailers - Galvanized Steel and Black Rubber - 4"
- Shop: CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 2
- Video: CE Smith Deep V Keel Roller Assembly for Boat Trailers Review
- Shop: Trailer Square U-Bolts (Qty 2), 4-1/8" x 3" x 7/16"
- Search Results: trailer coupler
- Video: An In-Depth Look at the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System
- Shop: Roof Rack
- Q&A: Keel Roller Assembly to Fit 3 Inch Wide Trailer Tongue on 2004 McClain Boat Trailer
- Q&A: Spacing and Dimensions of the CE Smith Spool Roller Assembly?
- Q&A: What is the Inside Width of the Roller in CE Smith 4-Inch Spool Roller Assembly
- Q&A: Can the CE Smith U Bolt # CE15253A Be Used to Mount the CE Smith Offset Spool Roller # CE32150G
- Q&A: How Tall is the CE Smith Offset Spool Roller Assembly, # CE32150G.
- Q&A: Torque Specification for 12 Inch Wheel with 4 Lug Nuts on Boat Trailer
- Article: Boat Trailer Guides: Which are the Best?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Rooftop Cargo Carriers
- Article: Best Boat Trailer Jacks
- Article: The Basics of Boat Trailer Bunks: Bunks or Rollers?
- Article: Trailer Maintenance Schedule