Will the T-One Wiring Harness # 118461 Fit a Japanese Model 1999 Subaru Forester
Published 08/23/2010
Products Featured in This Question
Question:
I looked all over and the 10 pin connector is the only one. I checked the incoming wires to the connector for function. WB Brake LR Battery (always hot) LgB Right turn BG Left turn RY Tail (there are 2 of these) B Ground (there are 2 of these) LW Couldn't figure out what this is connected to. I guess I will have to go with a universal hookup and splice into the wires I need. Thanks for your quick response to my question.
asked by: Richard
Expert Reply:
The connector on the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, item # 118461, is a 6 pin connector and most likely will not work on your vehicle if the connector is a 10 pin connector.
See if you can find a mating connector in the rear of your vehicle. Look around because the Subaru Forester connector can be in several locations like right up against the back seat or on the drivers side, passengers side or on along the back threshold of the vehicle. You may find the correct connector if the one you have already located is not the only one present or the correct mating connector.
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Base Plate for Tow Bar
- Q&A: Recommended Parts for Rebuild/Upgrade of Harbor Freight Trailer
- Q&A: Upgrading Trailer Tires and Wheels For Highway use on Harbor Freight 4x8 Folding Trailer
- Q&A: How to Upgrade Trailer with 45 MPH Speed Rating for Highway Speeds
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
- Shop: Curt Class II Drawbar - 3/8" Rise, 1" Drop - 7-13/16" Long - 3,500 lbs
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Article: Trailer Wiring Diagrams
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer tires and wheels
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: trailer hitch ball mount
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Video: Clean Up Your Trailer Wiring
- Shop: Brake Controller
- Video: How to Choose a Trailer Brake Controller
on Custom Fit Vehicle Wiring
Richard
8/23/2010
I looked all over and the 10 pin connector is the only one. I checked the incoming wires to the connector for function. WB Brake LR Battery (always hot) LgB Right turn BG Left turn RY Tail (there are 2 of these) B Ground (there are 2 of these) LW Couldn't figure out what this is connected to. I guess I will have to go with a universal hookup and splice into the wires I need. Thanks for your quick response to my question.