Fit and Compatibility of Reese Sidewinder on Leland 7910 and Lil Rocker on a 2014 Chevy Silverado

Question

Question:

I have a 2014 Silverado 1500 crew cab 6 ft bed. I believe I need a Reese Sidewinder ST400-SW16 for Leland Af-7910 and have a question about the 5th wheel hitch. Will this Sidewinder work with RBW Lil Rocker 15K. If it will work, I will need the correct wedge kit and rail kit. Help please. Thank you

asked by: Derrell F

0

Expert Reply:

Don't worry, I can help you. Yes, the Reese Sidewinder # ST400-5AS16K is a confirmed fit for your Leland 7910 pin box.

I spoke with my contact at Reese and he stated that you can use the RBW Lil Rocker 5th wheel hitch with a Revolution/Sidewinder pin box on your trailer. Remember that on any type of slider hitch it must remain in the towing and locked position and never slid back when using a Revolution/Sidewinder.

The correct wedge for your RBW Lil Rocker is # SWW-07. The RBW Lil Rocker 5th wheel hitch fits in industry standard above the bed rails.

I have linked all the above mentioned products to this page for your convenience.

expert reply by: Jackie C

0

Answer 1

You are correct, the Curt Q20 hitches are not compatible with Sidewinders due to the wide jaw opening of the hitches. Your best option is going to be to replace your current hitch with a stationary one compatible with a Sidewinder. The Reese Select…

view full answer...

Answer 2

Hey Mark, thanks for reaching out! There is a grease zerk fitting in the top of the pin box that should prevent you from having to disassemble the Reese Sidewinder 5th Wheel King Pin with Rotating Turret #RP77FR in order to grease it.

view full answer...

Answer 3

According to my contacts at Reese, a Sidewinder like #RP61412 would be compatible with your RBW fifth wheel hitch. The standard wedge included with the Sidewinder WILL NOT be compatible, and the #SWW-07 wedge would be needed. You will need to choose…

view full answer...

Answer 4

I certainly can. I went out to the warehouse and pulled the mounting part, #ST400, and did the measurements myself. The Sidewinder Rotating Turret Premium Pin Box Coupler, #ST400, is made to fit pin boxes: Leland 7910, 7920, and 7921; 5AB-E7920;…

view full answer...

Answer 5

The best option is custom wedge #SWW-07. This wedge was designed for RBW brand 5th wheel hitches. It is likely going to be a much better fit than the universal wedge. I have linked a video review for you.

view full answer...

Answer 6

It sounds like you have a Leland 7920 pin box. This matches all of the specs you gave except the 2b measurement which is the height different between one set of bolt holes to the row that is either one set higher or one set lower. The Leland 7920 has…

view full answer...

Answer 7

On your Leland 7910 pin box, you have a measurement of 9 inches from the center of the first row of bolts to the center of your king pin. We have a few of Sidewinder pin box options to give you 22 inches more room between the cab and your camper…

view full answer...

Answer 8

Yes, we can determine if there is a Sidewinder replacement pin box available for your trailer. You will need to take 6 measurments since you cannot locate the pin box manufacturer and model number. I have added a numbered drawing, see link, that you…

view full answer...

Answer 9

Thank you for the pictures, it made it easy to verify your components. I reached out to Lippert to confirm your current pin box bolt pattern as 1621, which would mean that the Reese Sidewinder 68220 would be a compatible replacement. The 68202 wedge…

view full answer...

Answer 10

In regards to installing a wedge on the Sidewinder 5th Wheel King Pin with Rotating Turret like part #RP34FR, this will only need to be done one time for each hitch. It may be a good idea to check the torque on the bolts every so often but…

view full answer...

Answer 11

The correct Sidewinder wedge for your RBW 15K Lil Rocker 5th wheel hitch is the 5th Airborne Custom Wedge for RBW Fifth Wheels #SWW-07. I've attached a video review to assist. Let me know if you need anything else.

view full answer...

Answer 12

From what we have learned what you have been told by Reese is correct. There are 2 different B and W Companion 5th wheel trailer hitches. One of them just mounts in a gooseneck ball hole. The other one is designed only for the Ram OEM pucks in the…

view full answer...

Fit and Compatibility of Reese Sidewinder on Leland 7910 and Lil Rocker on a 2014 Chevy Silverado

Continue Researching