Is there a Custom Sidewinder Wedge for an RBW 5th Wheel Hitch

Question

Question:

Do you need a different wedge for the lil rockr 15k to match up with a SW 16k?. Mine seems to bind when unhooking unless I am perfectly straight.

asked by: John K

1

Helpful Expert Reply:

There is a custom wedge available to use a Sidewinder with an RBW hitch. It is wedge # SWW-07. If you look at the Sidewinder manual it states "Note: Truck and trailer must be straight in-line for the wedge to enter into the fifth wheel funnel." It doesn't really mention having to be straight to uncouple but it does make it easier. At an angle there is likely going to be tension on the king pin which is going to make it bind up.

expert reply by: Michael H

1

Answer 1

I spoke with my contact at Reese and he stated that you can use the RBW Lil Rocker 5th wheel hitch with a Revolution/Sidewinder pin box on your trailer. Remember that on any type of slider hitch it must remain in the towing and locked position and…

view full answer...

Answer 2

According to my contacts at Reese, a Sidewinder like #RP61412 would be compatible with your RBW fifth wheel hitch. The standard wedge included with the Sidewinder WILL NOT be compatible, and the #SWW-07 wedge would be needed. You will need to choose…

view full answer...

Answer 3

The best option is custom wedge #SWW-07. This wedge was designed for RBW brand 5th wheel hitches. It is likely going to be a much better fit than the universal wedge. I have linked a video review for you.

view full answer...

Answer 4

I have a solution for you. Looking at your pictures and based off the measurements given that will take a Reese hitch. You will need the Reese 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs #RP30047. Its foot pattern will fit the holes and…

view full answer...

Answer 5

During assembly of the Reese Sidewinder #RP34FR you will need to apply white lithium grease such as #L11354 to the wear plate and the arm tube prior to putting the turret on the arm. The grease should also be applied around the wedge and the king pin…

view full answer...

Answer 6

Don't worry, I can help you. Yes, the Reese Sidewinder #ST400-5AS16K is a confirmed fit for your Leland 7910 pin box. I spoke with my contact at Reese and he stated that you can use the RBW Lil Rocker 5th wheel hitch with a Revolution/Sidewinder…

view full answer...

Answer 7

Hey Mark, thanks for reaching out! There is a grease zerk fitting in the top of the pin box that should prevent you from having to disassemble the Reese Sidewinder 5th Wheel King Pin with Rotating Turret #RP77FR in order to grease it.

view full answer...

Answer 8

It sounds like you have a Leland 7920 pin box. This matches all of the specs you gave except the 2b measurement which is the height different between one set of bolt holes to the row that is either one set higher or one set lower. The Leland 7920 has…

view full answer...

Answer 9

The correct Sidewinder wedge for your RBW 15K Lil Rocker 5th wheel hitch is the 5th Airborne Custom Wedge for RBW Fifth Wheels #SWW-07. I've attached a video review to assist. Let me know if you need anything else.

view full answer...

Answer 10

In regards to installing a wedge on the Sidewinder 5th Wheel King Pin with Rotating Turret like part #RP34FR, this will only need to be done one time for each hitch. It may be a good idea to check the torque on the bolts every so often but…

view full answer...

Answer 11

From what we have learned what you have been told by Reese is correct. There are 2 different B and W Companion 5th wheel trailer hitches. One of them just mounts in a gooseneck ball hole. The other one is designed only for the Ram OEM pucks in the…

view full answer...

Answer 12

Yes, we can determine if there is a Sidewinder replacement pin box available for your trailer. You will need to take 6 measurments since you cannot locate the pin box manufacturer and model number. I have added a numbered drawing, see link, that you…

view full answer...

Is there a Custom Sidewinder Wedge for an RBW 5th Wheel Hitch

Continue Researching