Where Does a Reese Sidewinder Pin Box Need to be Greased

Question

Question:

Where do you need to lubricate this unit and how is that achieved?

asked by: Phil

0

Expert Reply:

During assembly of the Reese Sidewinder # RP34FR you will need to apply white lithium grease such as # L11354 to the wear plate and the arm tube prior to putting the turret on the arm. The grease should also be applied around the wedge and the king pin prior to towing. This information can be found in the linked instructions as well.

expert reply by: Michael H

0

Ronald M.

7/5/2020

Please tell me everything I need to covert my pin box to the sidewinder.

Chris R.

7/9/2020

I would just need to know what model pin box is currently on the trailer. There should be a model number stamped right on the pin box itself. You can also contact the trailer manufacturer with your VIN and they should be able to tell you this.

Answer 1

Yes, we can determine if there is a Sidewinder replacement pin box available for your trailer. You will need to take 6 measurments since you cannot locate the pin box manufacturer and model number. I have added a numbered drawing, see link, that you…

view full answer...

Answer 2

I spoke with my contact at Reese and he stated that you can use the RBW Lil Rocker 5th wheel hitch with a Revolution/Sidewinder pin box on your trailer. Remember that on any type of slider hitch it must remain in the towing and locked position and…

view full answer...

Answer 3

On your Leland 7910 pin box, you have a measurement of 9 inches from the center of the first row of bolts to the center of your king pin. We have a few of Sidewinder pin box options to give you 22 inches more room between the cab and your camper…

view full answer...

Answer 4

In regards to installing a wedge on the Sidewinder 5th Wheel King Pin with Rotating Turret like part #RP34FR, this will only need to be done one time for each hitch. It may be a good idea to check the torque on the bolts every so often but…

view full answer...

Answer 5

I have a solution for you. Looking at your pictures and based off the measurements given that will take a Reese hitch. You will need the Reese 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs #RP30047. Its foot pattern will fit the holes and…

view full answer...

Answer 6

The correct Sidewinder wedge for your RBW 15K Lil Rocker 5th wheel hitch is the 5th Airborne Custom Wedge for RBW Fifth Wheels #SWW-07. I've attached a video review to assist. Let me know if you need anything else.

view full answer...

Answer 7

There is a custom wedge available to use a Sidewinder with an RBW hitch. It is wedge #SWW-07. If you look at the Sidewinder manual it states "Note: Truck and trailer must be straight in-line for the wedge to enter into the fifth wheel…

view full answer...

Answer 8

According to my contacts at Reese, a Sidewinder like #RP61412 would be compatible with your RBW fifth wheel hitch. The standard wedge included with the Sidewinder WILL NOT be compatible, and the #SWW-07 wedge would be needed. You will need to choose…

view full answer...

Answer 9

I certainly can. I went out to the warehouse and pulled the mounting part, #ST400, and did the measurements myself. The Sidewinder Rotating Turret Premium Pin Box Coupler, #ST400, is made to fit pin boxes: Leland 7910, 7920, and 7921; 5AB-E7920;…

view full answer...

Answer 10

Thank you for the pictures, it made it easy to verify your components. I reached out to Lippert to confirm your current pin box bolt pattern as 1621, which would mean that the Reese Sidewinder 68220 would be a compatible replacement. The 68202 wedge…

view full answer...

Answer 11

The best option is custom wedge #SWW-07. This wedge was designed for RBW brand 5th wheel hitches. It is likely going to be a much better fit than the universal wedge. I have linked a video review for you.

view full answer...

Answer 12

From what we have learned what you have been told by Reese is correct. There are 2 different B and W Companion 5th wheel trailer hitches. One of them just mounts in a gooseneck ball hole. The other one is designed only for the Ram OEM pucks in the…

view full answer...

Where Does a Reese Sidewinder Pin Box Need to be Greased

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching