Chart With Error Codes Explained for the Prodigy P2 90885

Question

Question:

Would like to get a list of error codes for Prodigy 90185. Links to various sites dont seem to work. Getting dashes in display and dont know what that means. Thanks

asked by: John D

0

Expert Reply:

I attached a picture that has a chart with all of the error codes for the Prodigy P2 part # 90885 that you referenced.

I am not sure what you mean by dashes on the display so hopefully the chart helps you.

Feel free to email back with pictures of the display if you need more help.

expert reply by: Jameson C

0

click to enlarge

Jim

7/31/2020

THE CONTROLLER HAS LOST ALL BRAKE ADJUSTMENT AND LOCKS UP WHEN BRAKES ARE APPLIED

Reply

Chris R.

8/10/2020

It honestly sounds like there may be an internal issue with the brake controller that requires a full replacement. I would start though by simply unplugging the controller from power, letting it sit for a bit, and then hooking it back up. Hopefully this will reset the unit and get it back to working like normal.

Reply

Jim

8/10/2020

@ChrisR found the issue it was a miss wired trailer lights on trailer

Reply

Jason R.

5/8/2025

What do you do for the pL code on the brake controler

Reply

Jameson C.

5/8/2025

@JasonR Yeah it is really odd that specific code doesn't have a remedy listed. Normally the fix for this is to check the power and ground wires of the brake controller and fix any issues you find there.

Reply

Answer 1

The first error code, SH, you are seeing on the Prodigy Brake Controller (instructions linked below) means the brake wire sees a short circuit during idle condition. The second code, OL, indicates an overload condition during operation. For the first…

view full answer...

Answer 2

Hey Michael. The backup camera that comes with the Furrion Vision S+ System item #FR57AD has built in mounting holes in the casing. It comes with four #6 x 3/4" flat head self-tapping screws, four #4 x 1/4" self-tapping screws, sealant, and…

view full answer...

Answer 3

Electric brakes have 2 wires located at the back. One is for power and the other is for ground (it doesn't matter which is used for which function). The ground wires should be connected to the trailer frame. The only other place that would carry…

view full answer...

Answer 4

Those definitely look like Prodigy P2 #90885 troubleshooting codes! You can verify this if the numbers you are seeing are blue. If they are red then this means you have the discontinued Prodigy P1 90185. Regardless of which one you have, the…

view full answer...

Answer 5

The 125255UC seal has a 1.249" ID and a 1.983" OD and for that our part #34823 will be the correct replacement.

view full answer...

Answer 6

Hello David, thanks for reaching out. We do have an anti-rattle clamp for a 2-1/2" hitch. Take a look at the following: - Trimax Universal Anti-Rattle Clamp for Class V Trailer Hitches #TMX66SR This uses a U-bolt to secure to the hitch. You…

view full answer...

Answer 7

The Furrion RV Soundbar - 29-3/4" Long - 80 Watt - Black #FSB24SA2C-BL does not come with any wires or instructions for connection other than the left and right speaker quick connections that allow you to put positive to red and negative to…

view full answer...

Answer 8

Good news, I can help you find a tire for your Sundown Horse Trailer. The 205/90-15 is a close tire size to the 7.00-15. The closest size to a 7.00x15 tire that we offer would be a 225/75-15. One 225/75-15 tire that could work for you is the Kenda…

view full answer...

Answer 9

Trailer brake controllers like the Prodigy P2 #90885 use a 4-wire hook up. The wire functions and connections are as follows: BLACK wire carries 12V power and connects to the vehicle + battery post through a 20- or 30-amp circuit breaker like…

view full answer...

Answer 10

I spoke with my contact at B&W about the Companion Gooseneck-to-5th-Wheel Trailer Hitch, part #BWRVK3500. They told me that the base weighs 131 lbs, and the coupler weighs 73 lbs, for a combined weight of approximately 204 lbs. This hitch would…

view full answer...

Answer 11

What you described is perfectly normal. When not connected to a trailer the Prodigy P2 part #90885 will show two dots like you described. After a period of inactivity the controller will go into sleep mode. It doesn't turn off with the vehicle…

view full answer...

Answer 12

Camco regulator #CAM40055 will provide 40 to 50 psi on the output side. It doesn't have a specific input rating but is designed for high-pressure city water lines. It also does not have a GPM rating (gallons per minute).

view full answer...

Chart With Error Codes Explained for the Prodigy P2 90885

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching