Will The Hydrastar EOH Actuator Work With A Nissan Titan XD Factory Brake Controller

Question

Question:

Does this kit work with the factory trailer brake controller in a 2017 nissan titan xd?

asked by: Josh

0

Expert Reply:

The Hydrastar Vented Marine EOH Actuator # HS481-8067 has a control module that makes it compatible with only Dodge, Ford, and GM factory brake controllers so it will not work with your Nissan factory brake controller. That being said, there always is a communication delay when it comes to factory brake controllers so we recommend installing a separate brake controller anyway.

I recommend the Redarc Tow-Pro Elite Brake Controller # RED44FR as it provides an easy too use control knob that takes up the least amount of space. With the Plug-and-Play Wiring Harness # RED39FR the installation process shouldn't take more than a few minutes to complete.

expert reply by: Kevin C

0

Answer 1

Hey Ken. I checked with the manufacturer and the Dutton-Lainson Boat Trailer Jack w Footplate item #DL22340 does not have an optional wheel kit. It's the DLX-SF model. The Dutton-Lainson item #DL22339 is the DLX-SW model that comes with the wheel…

view full answer...

Answer 2

That is an interesting dilemma; for the Prodigy P2, the 0.9 error is one that will flash a few times a second or steadily display. When this occurs it is because the controller recognizes that the trailer is connected but the P2 loses connection to…

view full answer...

Answer 3

I attached a picture that has a chart with all of the error codes for the Prodigy P2 part #90885 that you referenced. I am not sure what you mean by dashes on the display so hopefully the chart helps you. Feel free to email back with pictures of the…

view full answer...

Answer 4

Even without the trailer connected, the 0.9 error code on the Tekonsha Prodigy Brake Controller is indicating that there is a ground problem to the brake controller along the white wire. Depending on the vehicle, the wire could be connected through…

view full answer...

Answer 5

I reached out to HydraStar, who told me the HydraStar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness - 1,600 psi #HS381-9067 will work with the factory brake controller on your 2017 Nissan Titan XD and that you do NOT have…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Will The Hydrastar EOH Actuator Work With A Nissan Titan XD Factory Brake Controller

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching