A Closer Look at the etrailer Swivel Jacks with Bolt-On Mounting Plates Video

Hey Joe, Does your Bradford flatbed have a recessed gooseneck hitch already installed or is it just the flat bed right now? If not, you're going to need to cut out space for a gooseneck hitch like the B&W #BWGNRK1500 to be installed. From…

Hey Frank, 2" hitch balls like what you see on the Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches #DT49MR should be torqued to 250 ft. lbs. This shank come pre-torqued though, so you shouldn't have to worry about that. If there is…

Hey Frank, on the etrailer box part #e64VV all of the walls are welded. The thickness of the steel is 13 gauge. What will you put in the box?

Hey David! There's no difference other than the sale on the Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness -item #RED72CR or item #RED68CR. Both of these include the Tow-Pro Liberty and the plug and play adapter you'll need for…

The Americana Trailer Wheel Lug Nut #AM26NR would require the use of a 3/4" socket.

If your 2019 Toyota Tundra includes the factory trailer wiring for a trailer it will have a connector under the dash for a Trailer Brake Controller #RED72CR. This Controller #RED72CR does come with the connector for this application. The small…

If your truck has a hitch, tow button and a trailer connector I would expect that it DOES have the tow package. In this case you would use part #3031-P to connect the Prodigy to the truck's under-dash port. Please see the linked video showing the…

Easiest way would be to use a strap like a bungee part #EM06701to wrap around the handle and jack body to hold the handle to the jack.

Yes, the Draw-Tite Ball Mount part #DT49MR comes with a pre-torqued 2" hitch ball as well as a 5/8" diameter hitch pin and clip. It comes ready to go and use.

Every hitch and drawbar will have some movement between them, it's unavoidable. Any manufactured product like a receiver hitch will have variances in its size. For instance, the Curt #14090 Class IV hitch has a 2 inch receiver. The actual…

One side of the breakaway switch wiring will have current running through it. As long as the plunger pin of the breakaway switch is inserted into the switch the other side of the wiring should have zero current running through it. Once you pull the…

The rule of thumb for estimating a tongue weight is 10-15 percent of trailer weight. A 4,600 pound trailer would have a tongue weight between 460 and 690 pounds. Somewhere between a 1,000 to 2,000 pound capacity jack would be fine. Having a jack that…