Will Gravel Roads Damage the Back Up Light # BUL10CB Mounted on a Boat Trailer
Updated 02/24/2016 | Published 02/23/2016 >
Products Featured in This Question
Question:
Youve answered several of my questions regarding a Submersible Backup Light for my boat. I have one more question, or concern. I travel on a number of gravel roads with my boat. Im afraid if I purchase the BUL10CB Light and use the A70GB Grommet, along with the recommended Mounting Bracket, the back of my light will be exposed to the debris while traveling down the road. My thought was to use a metal, or heavy plastic box to attach the grommet and light to and for go the Mounting Bracket. Do you have any suggestions, or comments? Do you have a Retail Store? If so, what is the address? Thanks!
asked by: Mike S
Expert Reply:
As long as you mount the backup light part # BUL10CB using the grommet part # A70GB and bracket part # BK70BB in such a way that it would not be directly behind the tires of the trailer you really shouldn't have a problem with debris...unless you drive like the guys on Dukes of Hazzard.
I don't think a box to protect the lights would be necessary. You would just need to pick a good location for the lights and you would be fine.
We are in Wentzville, MO which is about 45 minutes west of St. Louis.
Mailing Address:
etrailer
1507 East Hwy A
Wentzville, MO 63385
Product Page this Question was Asked From
PVC Grommet for 6-1/2" Oval Trailer Tail Lights
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Grommet
- 6-1/2 Inch Long
- Oval
- Optronics
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Why Are 5th Wheel Wiring Harnesses So Long?
- Q&A: What do I Need to Install a Brake Controller on my 2020 Land Rover Discovery
- Q&A: Will Removable Wheel # TV89FR Fit JX Model Trailer Jacks
- Q&A: How to Determine Trailer Hub's 5 Lug Bolt Pattern
- Q&A: Diameter of the Replacement Footplate Keeper Pin for etrailer and Ram Square, Direct Weld Jacks
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Maintenance Schedule
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: The 5 Best Trailer Drop Hitches You Can Buy

