Trailer Hitch, Ball Mount, and 50 mm Hitch Ball Recommendation for a 2003 Dodge Ram

Question

Question:

I am buying Curt trailer hitch receiver part #1333 and ball mount part #2923 and need a 50mm hitch ball part #63912 will this all work together? My concern is the 50mm hitch ball.

asked by: Bob D

0

Expert Reply:

In order to use the hitch ball part # 63912 in the ball mount part # D-4 you will need to use a hitch ball bushing part # C21100 since the shank of the hitch ball is 3/4 inch in diameter and the hole of the ball mount is 1 inch.

The ball mount will fit the hitch part # 13333 as-is though. For a hitch pin you would want part # PC3 or for a locking hitch pin # e98880.

expert reply by: Jameson C

0

Answer 1

Hey Fred, You can absolutely get that set up going for your 4 runner! We have a 50mm hitch ball, #EH53C-C, which can be used with any adjustable ball mount with a 1" diameter hole for the 50mm ball. Assuming you have a 2" hitch on your 4…

view full answer...

Answer 2

I have a solution for you. First, for a 50mm ball I recommend #63912. Then for a ball mount with a 2 inch drop I recommend #D-4 and the Hitch Pin and Clip, #PC3. You are right, the ball mount takes a ball with a 1 inch shank diameter so to be able to…

view full answer...

Answer 3

We currently carry four different size hitch balls which are 1-7/8", 50mm, 2", and 2-5/16". The most common hitch ball size in Europe is 50mm for which you can use part #63912 if you need a 3/4" diameter shank or part #EH53C-C if…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The appropriate torque spec for any application will vary depending on the construction of the wheel as well as on the stud size. I suggest checking the wheels you're using to see if their manufacturer has a suggested torque rating. Steel trailer…

view full answer...

Answer 10

Hey Chris, we do have more hitches now for your 2022 Subaru Crosstrek than what we had when we made the video you referenced but even with that in mind I would recommend the B and W part #BW32PR because it's mostly hidden and because it has the…

view full answer...

Trailer Hitch, Ball Mount, and 50 mm Hitch Ball Recommendation for a 2003 Dodge Ram

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching