Is Spindle Available For Kodiak 12 Inch Hub And Rotor Assembly For 5,200 - 6,000 Lb Axles

Published 11/19/2015

Products Featured in This Question

Kodiak 12" Hub-and-Rotor Assembly - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs

(262)

$172.17

Replacement Trailer Wheel Bearing - 15123 - Qty 1

(2216)

$12.64

Replacement Race 15245 for Bearing 15123 - Qty 1

(1317)

$3.87

Replacement Race 25520 for Bearing 25580 - Qty 1

(1317)

$16.11

Replacement Trailer Wheel Bearing - 25580 - Qty 1

(2216)

$24.72

Grease Seals 10-36 - Double Lip - I.D. 2.250" / O.D. 3.376" - 5.2K to 8K Axles

(2675)

$8.45

Question:

Can you provide the part numbers of the spindles that you stock that will work with the KHR12 hub?

asked by: Joe M

Expert Reply:

We do not offer a spindle that will work with part # KHR12D. This hub is designed to fit 5,200 - 6,000 lb axles and wheels that are 15 inches diameter or larger.

You can contact your local axle retailer and ask about a spindle that will work with this Hub. The inner bearing (sold separately), is part # 25580 and has an inner diameter of 1.750. The outer bearing (sold separately), is part # 15123 and has an inner diameter of 1.250.

The inner race (included), part # 25520 has an outer diameter of 3.265 and the outer race (included), part # 15245 has an outer diameter of 3.376.

The grease seals (sold separately), part # RG06-070, have an inner diameter of 2.250 and an outer diameter of 3.376.