Replacement Installation Hardware for Draw-Tite Class III # 75673

Question

Question:

Hello, I believe we purchase a Code: 75673 for a 2013 Subaru Outback. We are transferring this hitch to 2016 Subaru Outback. Is there just a fastener hardware kit available for this hitch?

asked by: Ron G

0

Expert Reply:

We do indeed offer a replacement hardware kit, part # RHK.

Click the provided link for the kit, and you'll be taken to the product page where you'll type in the part number of your hitch, and from the drop down menu choose the hitch manufacturer.

expert reply by: Mike L

0

click to enlarge

Answer 1

We do sell replacement hardware kits for all of the hitches we offer like your #75673 with the part #RHK. You'd need to select Draw Tite from the drop down menu and enter the hitch part number and you'd be set.

view full answer...

Answer 2

Yes, you will need to go to the product page for the Replacement Hardware Kit #RHK, enter in the part number #75673 and manufacturer, hit Add To Cart and we will ship you the hardware kit for the hitch that you need. The Draw-Tite #75673 is confirmed…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

Hello Charles, Great question. The only difference between the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e25TR, and the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C67JR is the…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 10

Hi Jeffrey, For a hitch for the 2026 Subaru Outback Wilderness that installs behind the bumper, I recommend the etrailer Class III Trailer Hitch Receiver part #e25TR. The cross tube is totally hidden behind the bumper, and only the hitch receiver…

view full answer...

Answer 11

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 12

Hi John! We definitely have hitches available for your 2026 Lexus RX350h and the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e29ZV is a great option. The matte finish makes our hitches blend in better than…

view full answer...

Replacement Installation Hardware for Draw-Tite Class III # 75673

Products Featured in This Question

Continue Researching