How and Where Does Torklift All Terrain Landing Gear Install on Scissor Steps

Question

Question:

We remove our foldable aluminum camper steps when traveling and store them in the camper. Is it much of a chore to install and remove the all terrain landing gear?

asked by: Rick

1

Helpful Expert Reply:

The Torklift All Terrain Landing Gear # TLA8000 just bolts onto the last step of a scissor step assembly using included hardware. This makes installation quick and easy. So I would not say it is much of a chore at all!

expert reply by: Michael H

1

Answer 1

Both the Brophy #AS24 and the TorkLift #TLA7804 are easily removed when not in use- and it's actually recommended that you do so. Additionally, they both weigh in around 26-lbs total, so they're easy to move on and off; so they'd both be…

view full answer...

Answer 2

The TorkLift SafeStep Vinyl Barriers are 18-1/2" long and 10-1/2" tall, so they're going to be just a tad too big for the Brophy Scissor Steps #AS04 which are 17" wide. You could potentially trim off some of the excess vinyl to…

view full answer...

Answer 3

The Brophy Scissor Step Bracket #TSSB will install on the edge of your tailgate. You will have to drill two holes for the L shaped pins. After drilling, all you have to do is simply insert the L pins into those holes and attach you Brophy steps! For…

view full answer...

Answer 4

Rodney, you aren't the first and likely not the last to want this, but unfortunately there is no way to tie in your Furrion RV camera system to your Ford F-250. Furrion's camera systems are only compatible with their monitors like #FR97FR, so…

view full answer...

Answer 5

I really wish we carried a triple step that would mount up to your RV without any modification but it looks like the best option we could provide would be to get a triple step like the part #TLA8103.

view full answer...

Answer 6

I attached a diagram that shows how the Deka Battery Isolator #DW08770 wires to a dual battery setup like you have.

view full answer...

Answer 7

Which holes are you talking about specifically on the steps?

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 10

Hi Frank, The In-command system does limit our options for what air conditioners we have that'll work with that system. You can replace your Coleman AC with the Dometic FreshJet 3 RV Air Condition part #DMC94JF and install the Dometic Climate…

view full answer...

How and Where Does Torklift All Terrain Landing Gear Install on Scissor Steps

Product Page this Question was Asked From

Continue Researching