Distance Between Bracket Holes of Torklift All Terrain Landing Gear Scissor Steps part # TLA8000

Question

Question:

the holes in the picture attached

asked by: Adam Z

1

Helpful Expert Reply:

Which holes are you talking about specifically on the steps?

expert reply by: Jameson C

1

click to enlarge

Adam Z.

5/28/2020

the holes in the picture attached

Jameson C.

5/28/2020

The distance between the holes you pointed out on the Torklift All Terrain Landing Gear Scissor Steps part # TLA8000 is 3.75 inches.

Answer 1

Those loops you see on the side of the brackets on the #TLA8000 are for the TorkLift GlowGuide Handrail #TLA7621. I attached a picture that shows how the handle attaches to those loops.

view full answer...

Answer 2

We can set you up with new steps so that you love your whole camper setup, steps included. Based on the information you provided, I recommend taking a look at the Brophy Camper Scissor Steps #AS25. This is a 5-step assembly that can expand to between…

view full answer...

Answer 3

For your mounting height of 43 inches the best solution we have is the part #AS25 which has a mounting bracket height of between 40" - 48" which would be perfect for you. The additional step you mentioned would not interfere with that…

view full answer...

Answer 4

That is a good question, and you can leave your current fold-out steps up and in the folded position when installing the mounting bracket of the Brophy Scissor Steps. The reason is, the bracket will be installed just underneath the door so as long as…

view full answer...

Answer 5

Great question! The All Terrain Landing Gear for RV Scissor Steps, #TLA8000, work with most factory scissor steps. Many steps like Brophy Scissor Steps #AS23 use rivets. You are correct - the rivets will need to be drilled out using a 1/4" drill…

view full answer...

Answer 6

Hey Cindy, when the Maxx Mini Deluxe 3857 #MA00-03801 is installed it will sit 4-1/8 inches above the roof.

view full answer...

Answer 7

There are not installation instructions available specific to the Replacement MaxxAir Roof Vent Manual Lift. I have attached an exploded diagram that shows the placement of the lift in the fan assembly for your reference.

view full answer...

Answer 8

The TorkLift GlowStep Camper Scissor Steps - 5 Steps - Aluminum - 20" Wide - 350 lbs #TLA7805 are not trailer specific. This step has a bracket mounting height of 42 inches with step dimensions of 20 by 8 inches. The height of the steps when…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Distance Between Bracket Holes of Torklift All Terrain Landing Gear Scissor Steps part # TLA8000

Product Page this Question was Asked From

Continue Researching