Tire Pressure Recommendation for the Kenda 4.80/4.00-8 Bias Trailer Tire
Updated 08/14/2020 | Published 10/04/2015 >
Question:
What is proper inflation pressure and max towing speed? Thanks,
asked by: Jim B
1
Helpful Expert Reply:
Trailer tires should always be inflated to their max psi to ensure you get the full weight capacity and the best tire wear.
The Trailer Tire part # AM30060 that you referenced should be inflated to 90 psi when cold.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 4.80/4.00-8
- 8 Inch
- K - 65 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: wheel bearing grease
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range B
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range C
- Q&A: Can a Load Range C Tire be Used Instead of a Load Range B Tire on a Trailer
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Q&A: Trailer Wheel Torque Spec Chart
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Curt Mounting Bracket for 4-Pole Flat Trailer Connector Review
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Video: Setting up the etrailer Trailer Hitch Receiver on a 2014 Mazda CX-5
- Search Results: trailer jack
- Shop: Brake Controller
- Shop: Gooseneck Hitch
- Search Results: trailer lights
- Shop: Base Plate for Tow Bar
- Search Results: trailer hubs and drums
- Shop: Vehicle Tow Bar Wiring
- Q&A: Upgrading Boat Trailer Tires
- Q&A: Will My New Galvanized Wheels Corrode My Hubs




Mark
8/5/2020
I have the kenda tube type trailer tyre 4.8/4.00-8. It says 90 psi pressure, but that feels scary? I was going to put 40 lb psi . It’s only a small trailer with camping stuff and fishing gear in, can you advise please. Thanks