CE Smith Trailer Fenders - Top and Side Step - CE19503 Review

content loading

Customers compare CE19503 to these similar products

Products Featured in this Video

Review of CE SMIth Trailer Fenders CE19503

Speaker: Today, we're going to be taking a look at the CE Smith Single Axle Trailer Fenders with top and side steps. These are designed for 13-inch diameter wheels. For one trailer fender, you can use Part Number CE19503. If you need two trailer fenders, you can use Part Number CE19503-2. The round fenders are going to cover the tires on your single axle trailer. It's going to act as a nice splash guard to keep road debris from hitting other vehicles and to help protect your trailer's cargo.

It's going to have that built-in fender skirt here on the backside, so that's going to keep a lot of items from being able to come into the cargo area of your trailer. It's going to have the three steps. You're going to one each side as well as one here on top. Real quick, I'm just going to go and give you the measurement of those steps measuring the, just the grip portion. The side steps are going to measure identical to one another, that's going to give us a measurement of 7 3/4 of an inch by 4 5/8. The top step is going to give us a measurement of 5 1/4 by 6 1/2.

Again, we have nice, textured surfaces on them. That way, it's going to ensure a nice secure footing, whether you're using this to get in and out of your trailer. It's going to offer a weight capacity of 300 pounds. The built-in skirt, again, is going to add extra protection. It's going to give us a skirt height of 10 3/4 of an inch here on the back side from the top of the fender to the bottom of that skirt. It's going to be made from a durable polypropylene construction so it's going to be corrosion-proof and rust resistant.

The black color is a nice color to have. The color is actually going to be molded into the plastic so that's a great feature because it's not going to scratch or wear off over time. This is a bolt-on installation. The fender is designed to attach to your trailer's existing brackets. This one is going to require drilling. There's no pre-drilled bolt holes when it comes to mounting, so you just line up, you put the fender on your trailer where it would be a good place to mount it.

If you have pre-existing brackets, go ahead and mark out those holes, drill them as necessary and attach it using some hardware. CE Smith is going to be manufactured in the USA. When it comes to the application, these are designed for single axle trailers with 13-inch diameter wheels. Taking a look at the over-all measurements of this fender starting with the over-all length, measuring from edge to edge, that's going to give us a measurement of about 40 1/8 of an inch. The over-all height is going to give us a measurement of 11 1/4 of an inch tall. Then, the over-all width, that's going to give us a measurement of right around 10 inches. Again, this is going to offer a weight capacity of 300 pounds. That's going to do it for our review of the CE Smith Single Axle Trailer Fenders. Again, for one trailer fender use Part Number CE19503 and then for a set of two, use Part Number CE19503-2. .

Questions and Comments about this Video

add comment

Info for this part was:

Written by:
Lindsey S
Edited By:
Leah B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.