Replacement Folding Pin Recommendation for a Swagman Quad 2x2

Question

Question:

does part # P322 folding pin fit on a Swagman Quad 2x2 trailer #64691?

asked by: Misty L

0

Expert Reply:

Yes, the replacement Long Folding Pin # P322 is the correct pin to use on your Swagman Quad 2+2 S64692 for the pivoting pin.

expert reply by: Jameson C

0

Answer 1

The Replacement Long Folding Pin for Swagman Trailhead Bike Carriers #P322 measures 3-1/8" and is unlikely to be compatible with your Yakima rack. The only pin and wire lock we carry from Yakima is the Replacement Pin and Wire Lock for Yakima…

view full answer...

Answer 2

Yes, the Replacement Pin and Tether #P307 that you referenced has a ball bearing in the pin to keep it from sliding out. I attached a picture that shows the pins pointed out on a Swagman XC Bike Rack #S64650.

view full answer...

Answer 3

We have exactly what you are looking for. The correct replacement pin that allows you to fold the arms on your Swagman XTC-2 Bike Rack #S64670 is the Replacement Pin and Tether #P307. This will allow you to fold up your bike rack and keep your bike…

view full answer...

Answer 4

I went out to our warehouse an pulled the Swagman Replacement Long Folding Pin, #P322, The pin has a diameter of almost 1/2 of an inch. The actual measurement that I got from my calipers was .47 of an inch. If you are referencing he pin that secures…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Replacement Folding Pin Recommendation for a Swagman Quad 2x2

Product Page this Question was Asked From

Continue Researching