Coupler Lock for RAM, Bulldog Style Gooseneck Couplers

Question

Question:

How would this work with a Ram 2inch coupler?

asked by: Ken

0

Expert Reply:

For a gooseneck coupler lock, you would want # BLTL-55-40D for RAM gooseneck couplers or # BLTL-50-40D for Bulldog/Stallion/Superior/T.E.M. couplers.

expert reply by: Victoria B

0

Answer 1

I was not able to locate specific manufacturer information regarding the couplers that are used on Big Tex Gooseneck Trailers like what you have. With that being said, they do look very similar to the Ram Gooseneck Coupler #GCSQTW-30008 that you…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

Hey Claude, there isn't a replacement grease cap made for the part #RG04-230 but there's also no reason you couldn't use this cap with a grease setup. It would work just fine for that application.

view full answer...

Answer 4

Hey Randy, The Replacement Center Cap for Namsco Wheel Covers #NA9130 is approximately 3-7/8" in diameter.

view full answer...

Answer 5

We have the bearing part #387A which is over 2 inches in inner diameter and is seen on 10,000 lb axles but I'd have to know exactly what your spindle dimensions are to know for sure what you'd need. If you can use a digital caliper like the…

view full answer...

Answer 6

For a Bulldog 180 series jack you will need replacement drop leg pin #BD500177. It includes the spring, cotter pin, and washer. You should not have to remove the inner drop leg to replace the pin and spring. Start by pulling back on the pin. Then use…

view full answer...

Answer 7

The return spring inside the Bulldog Square Jacks like part #BD182800 are neither replaceable nor repairable according to Bulldog. Therefore, so you will have to replace the entire jack if yours is broken or damaged.

view full answer...

Answer 8

Hey Ed, the Trailer Hub and Drum Assembly assemblies we carry like the 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased #AKHD-545-35-K you purchased are pre-greased with Lithium complex, multipurpose grease. For compatible grease I…

view full answer...

Answer 9

For your 28 foot enclosed trailer, I'll give you the recommendation for parts all in the color black, but other color options are available and easy to find once you have the list of parts needed. Let me know if you need help with colors or have…

view full answer...

Coupler Lock for RAM, Bulldog Style Gooseneck Couplers

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching