What Are The Dimensions Of The Brophy Banjo Eye For Safety Chains
Published 08/28/2015
Products Featured in This Question
Question:
BE31 and BE38 I would like to know what the material size is plate is ?inch x ?inch x ?inch Thick.
asked by: Andrew A
0
Expert Reply:
I went to the warehouse and took some measurements of the Brophy Banjo Eye, part # BE31 and part # BE38. I have attached a photo of the Banjo Eye with the dimensions noted.
Both of these measures 3-1/2 x 3-5/8 inches and the material is .310 inches thick. The only difference between them is the diameter of the eye in plate. The BE31 is designed for a 5/16 inch diameter safety chain and the BE38 is designed for 3/8 inch diameter.
expert reply by:
Jeffrey L
0
click to enlarge
Product Page this Question was Asked From
Brophy Banjo Eye for 5/16" Diameter Safety Chain - Raw Steel - Weld On
- Accessories and Parts
- Trailer Safety Chains
- Safety Chain Parts
- Banjo Eye
- Brophy
more information >
Continue Researching
- Q&A: Battery Box that Can Fit Trailer Frame
- Video: Checking Out the Durabilt Recessed Trailer Tie-Down for Flatbed Trailers
- Shop: Brophy Banjo Eye for 5/16" Diameter Safety Chain - Raw Steel - Weld On
- Video: TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box Review
- Video: The Low-Down on the TorkLift ExtendedPower Battery Mount for Trailer Hitch Extension
- Search Results: battery bracket
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Durabilt Recessed Trailer Tie-Down for Flatbed Trailers - 6,600 lbs
- Search Results: stake pocket
- Search Results: weld on d rings
- Search Results: tie down anchors
- Shop: TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box
- Shop: TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box
- Shop: Brophy Banjo Eye for 3/8" Diameter Safety Chain - Raw Steel - Weld On
- Search Results: banjo eye
- Shop: Buyers Products 1" Forged Steel D-Ring With Weld-On Mounting Bracket - 55 Degree Bend
- Search Results: electric brake wire
- Search Results: kit
- Q&A: Installation of Hanger Brackets and Springs for Tandem Trailer Axles
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Are Two Sets of Safety Chains Needed for Flat Towing Setup
- Q&A: Dexter 10,000LB Axle Wheel Retaining Ring Placement
- Q&A: Replacement Bearings, Seal, and Brake Assembly for Dexter D1012 HD Axle
- Article: Trailer Wiring Diagrams
- Q&A: Should I Put Brakes on the Front or Back Axle of my Tandem Axle Trailer
- Q&A: How Much Does Weigh Safe True Tow Weight Distribution Hitch Weigh
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements