Replacement Hub with 4 on 4 Bolt Pattern for 1 Inch Diameter Straight Spindle
Updated 08/05/2015 | Published 08/04/2015
Question:
Looking for a hub for my home build small trailer. 4X4, 1 inch diameter shaft which is 3 inches long. Is the AKIHUB-440-2-1K what I need for the short spindle?
asked by: Billie
Expert Reply:
Trailer hub # AKIHUB-440-2-1K does use L44643 bearings which are associated with the BT8 spindle which is a straight spindle, 0.99 inches diameter, where the bearings ride. But the seal inner diameter is 1.249 inches.
Check the bearing numbers on your existing hubs to determine if they are indeed L44643 bearings. If so this hub is a likely fit if the seal inner diameter is 1.249 inches.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: 4 on 4 inch trailer hubs and drums
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings
- Video: Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles Feature Review
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: Demco Composite eZ-Latch Repair Kit for 2" Ball Couplers - 10,000 lbs
- Search Results: bow catcher
- Q&A: Recommended 4 on 4 Hubs for a Dexter 8-259 MTA-5 Hubs
- Q&A: Replacement Dexter Hub for 8-91A Hub
- Q&A: Replacement Trailer Idler Hub For Dexter 8-91A Hub With 4 on 4" Lug Pattern
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Pre-Greased
- Search Results: shorelander
- Search Results: bunk bracket
- Q&A: Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What Does BTR and BT8 Mean when Picking Out Replacement Trailer Hub
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Most Popular Wheel Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: How to Replace or Install an RV Roof Vent
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle