Troubleshooting Weight Distribution Hanger Bracket Installation on a V-Nose Trailer
Updated 05/20/2010 | Published 05/16/2010
Question:
I recently ordered the combination WD Hitch and Dual Cam Sway Control system Reese 66084. Im still waiting on the sway control components to arrive but have run into a snag while installing the WD hitch. My trailer has a V-nose that leaves me very little trailer frame exposed. This does not allow me to move the snap-up anchors far enough back on the frame to make the chains vertical from the spring bars. All connected, I have about a 20-30 degree angle on the chains with the top being farther forward. Should I find a different system? I dont want to damage this one or use it if Im not getting optimal results from it. Also, will the angle of the chains become an issue when its time to connect the anti-sway cams?
asked by: Daniel E
Expert Reply:
The angle of the chains will present a problem, with the chains angled forward to such a degree it will put forward pressure on the spring bars and the weight distribution head.
There is a solution though. You can use the Bolt On Weight Distribution Chain Hanger Kit, item # RP58305, in place of the Tip up chain hanger brackets. Once installed the chains are attached by raising the trailer tongue and rear of vehicle with the trailer jack. Tubular frames cannot be wider than 2-1/4 inches with this hanger kit, so you will need to be sure and measure before purchasing.
With these brackets you will be able to complete your installation with the chains in the correct orientation for correct weight distribution and sway control function. You can view one of these hangers installed on a trailer with the Dual Cam Sway Control, Item # RP26002, attached in the video we have on line (see link). At 4 minutes 50 seconds into the video a bolt on chain hanger is shown being used on a trailer that either has a v nose or a tool box located so that the tip up brackets cannot be used.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: CE Smith Safety Chains with S-Hooks - 24" Long - 3500 lbs
- Shop: Tension Chain Extensions for Andersen No-Sway Weight-Distribution Hitches - 11-1/4" - Pair
- Shop: Towing Mirrors
- Shop: TowSmart Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: CIPA Custom Towing Mirror - Slip On - Driver Side or Passenger Side
- Shop: K-Source Universal Towing Mirrors - Clip On - Convex Mirror - Qty 2
- Q&A: Safety Chain Extension Solution for Trailer being Towed by Lifted Truck
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Feature Breakdown: Universal Installation Kit for Trailer Brake Controller
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer wiring
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: trailer hitch ball mount
- Q&A: Clearance Differences Between Hitches For A 2026 Honda Odyssey EX-L
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Video: How to Choose a Trailer Brake Controller
- Shop: Base Plate for Tow Bar
on Weight Distribution Hitch
