Compatibility of Curt Custom 5th Wheel Installation Kit and Reese Fifth Wheel Hitch

Question

Question:

Would like to know about correct part # for Dodge 2500 2015 rail kit c16427-104 also I have a Reese hitch will this application work

asked by: Michelle E

0

Expert Reply:

Yes, the Curt Custom Fifth Wheel Installation Kit for Ram Truck, # C16427-104, which you referenced, is compatible with Reese hitches. The base rails included in this kit is compatible with your Reese fifth wheel hitch, so there will be no compatibility problems.

expert reply by: Chris O

0

Answer 1

Hey Antonio, yes the Curt fifth wheel rail kit part #C16427-204 that you referenced does fit your 2025 Ram 2500 short bed. Do you have a fifth wheel hitch already?

view full answer...

Answer 2

Hey Jared, yes a Reese round tube slider fifth wheel hitch will fit the rails of the Curt fifth wheel rail kit part #C16427-104 as this rail kit provides the industry standard rails that Reese and several other brand hitches are designed to fit. How…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey John, welcome back! We have just what you are looking for with a weight distribution shank designed for your 2.5 inch hitch size with like the part #EQ90-02-4900. This fits your hitch directly without needing an additional sleeve adapter. This…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Douglas thanks for the photos and the details really helped. For your 2020 Ram 2500 short bed without the OEM puck system, I recommend this setup: B&W Companion Sliding 5th Wheel Hitch w/ Turnoverball for Ram #BW28QR This gives you a removable…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Compatibility of Curt Custom 5th Wheel Installation Kit and Reese Fifth Wheel Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching