Will Curt Fifth Wheel Rail Kit Fit Reese 16k Round Tube Slider Hitch

Question

Question:

Will a Reese 16k round tube, slider hitch work with these rails?

asked by: Jared

0

Expert Reply:

Hey Jared, yes a Reese round tube slider fifth wheel hitch will fit the rails of the Curt fifth wheel rail kit part # C16427-104 as this rail kit provides the industry standard rails that Reese and several other brand hitches are designed to fit. How do you like your Reese slider?

expert reply by: Jameson C

0

Jameson C.

8/15/2025

Hey Jared, did the Reese slider hitch work well with your Curt rail kit? I'm curious because it could help others in a similar situation.

Answer 1

Yes, the Curt Custom Fifth Wheel Installation Kit for Ram Truck, #C16427-104, which you referenced, is compatible with Reese hitches. The base rails included in this kit is compatible with your Reese fifth wheel hitch, so there will be no…

view full answer...

Answer 2

Hey Antonio, yes the Curt fifth wheel rail kit part #C16427-204 that you referenced does fit your 2025 Ram 2500 short bed. Do you have a fifth wheel hitch already?

view full answer...

Answer 3

We have the Curt Custom Fifth Wheel Installation Kit for Ram Truck #C16427-204 listed as confirmed fit for the 2020 Ram 2500. There has not been a generational platform change since the new 2019 model year. We have this kit for your 2021 and…

view full answer...

Answer 4

A Reese 5th wheel hitch like the 30032 or 30033 you mentioned fits what are called industry-standard base rails, and the answer to your question is yes, the Curt E16 5th Wheel Trailer Hitch #C16115 will absolutely fit the same base rails as a Reese…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Will Curt Fifth Wheel Rail Kit Fit Reese 16k Round Tube Slider Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching